NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 ECC RDIMM Tyan FT83A-B7129 memory upgrade
16 GB dual-channel DDR4 3200 ECC registered kit for Tyan Thunder HX FT83A-B7129 servers
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection prevents data corruption in critical workloads
- Registered design improves signal integrity for stable server operation
- 3200 MHz DDR4 speed delivers responsive performance for demanding applications
- 2 V operation reduces power draw and heat output
- 288-pin RDIMM form factor fits Tyan FT83A-B7129 motherboards
Tyan FT83A-B7129 ECC RDIMM kit
This 16 GB kit contains two 8 GB DDR4 3200 registered ECC modules built for the Tyan Thunder HX FT83A-B7129 server platform. Each stick is a 288-pin RDIMM with CL22 latency and 1.2 V operation. The registered buffer and error-correcting code suit workloads that demand data integrity over raw speed.
Sustained load stability
Modules are stress tested under load to verify reliability during continuous server duties such as virtualization, database hosting or file serving. The registered design reduces electrical load on the memory controller, helping maintain consistent throughput during long-running tasks. ECC detects and corrects single-bit errors without halting the system.
Before ordering
Confirm the motherboard accepts DDR4 3200 registered ECC RDIMMs in a two-module population and that the BIOS is current enough to initialise PC4-25600 speeds. This kit is not for systems requiring unbuffered UDIMMs, non-ECC memory, or DDR5 modules. Builders needing higher capacity per slot or lower latency timings should look elsewhere.
Highlights
- ECC protection prevents data corruption in critical workloads
- Registered design improves signal integrity for stable server operation
- 3200 MHz DDR4 speed delivers responsive performance for demanding applications
- 2 V operation reduces power draw and heat output
- 288-pin RDIMM form factor fits Tyan FT83A-B7129 motherboards
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | Tyan Server/Workstation Motherboard Compatible Series Memory |
| Model | Tyan DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Tyan |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT |
Questions about this item
How much heat and power should I expect from the 1.20 V DDR4 3200 CL22 registered kit running continuously in a Tyan FT83A-B7129?
At 1.20 V the DDR4 3200 modules draw standard registered DIMM power; ECC RDIMMs add minimal heat versus unbuffered sticks, and the server chassis airflow handles the load without extra cooling.
What must the Tyan FT83A-B7129 already have for this 288-pin 16 GB kit to be recognised?
The board needs free DDR4 RDIMM slots that support registered ECC memory and a BIOS that accepts 1Rx8 organisation at the PC4-25600 speed grade.
Can the 3200 MT/s CL22 registered modules share channels with slower DDR4 ECC RDIMMs already installed in the FT83A-B7129?
All DDR4 RDIMMs on the same channel run at the lowest common speed and loosest timings, so the 3200 kit will down-clock to match the slower modules.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



