NEMIX RAM 8GB DDR4 2933 CL21 ECC RDIMM ASRock Rack ROMED8-2T
- 8GB
- DDR4 2933 (PC4 2340…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
16 GB registered ECC DDR4 kit at 2933 MHz, CL21, 1.2 V, validated for ASRock Rack ROMED8-2T EPYC motherboards
Capacity 16GB 2X8GB
This 16GB kit contains two 8GB DDR4 2933 ECC registered DIMMs built for the ASRock Rack ROMED8-2T motherboard. The modules run at PC4-23400 speed with CL21 latency and 1.20V voltage. They use a 1Rx8 organisation and major-brand chips from Samsung, Micron or Hynix.
Registered ECC RDIMMs are required by the target server board, so this kit fits EPYC-based systems that demand error correction and registered signalling. Builders using consumer boards that accept only unbuffered non-ECC memory should choose a different module type.
The motherboard requires DDR4 registered ECC DIMMs, and this kit matches that exact requirement with 288-pin RDIMM form factor, ECC functionality and registered buffering. Selecting unbuffered or non-ECC memory would prevent the system from operating correctly.
| Brand | NEMIX RAM |
|---|---|
| Series | ASRock Server Motherboard Compatible Series Memory |
| Model | ASRock DDR4 2933MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR23400-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASRock |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The motherboard should detect the 1.20 V DDR4 2933 modules automatically; consult the board manual for any recommended memory-configuration options.
Mixing ranks or speeds may force all channels to the lowest common timing; for best stability populate identical 1Rx8 modules in matched slots.
Check the BIOS memory information screen or use a tool such as dmidecode to verify speed shows 2933 MT/s and CAS latency 21.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?