We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 80 mm black frame 25 mm thick with transparent blades and 18 cm lead

NDLIULEI

NDLIULEI MF80201VX-Q010-S99 80x80x25mm 12V 3.84W 4-pin case fan

SKU CH-MY2X-ZHJ9R MPN MF80201VX-Q010-S99

An 80 mm square case fan with a magnetic suspension bearing, delivering 40.8 CFM at 12 V and 3.84 W

  • TypeCase Fan
  • Moves 40.8 CFM of air for steady case cooling
  • Magnetic suspension bearing cuts friction for quieter operation
  • Runs on 12 V drawing only 0.32 A for low power draw
  • Compact 80 x 80 x 25 mm frame fits tight builds
  • 18 cm lead with 4-pin connector enables PWM control

80 mm magnetic-suspension case fan

The NDLIULEI MF80201VX-Q010-S99 is an 80 by 80 by 25 mm case fan built for standard 12 V PWM headers. It draws 0.32 A and 3.84 W while moving 40.8 CFM, making it suitable for compact chassis or targeted component cooling.

Four-pin PWM install with short lead

The 4-pin connector plugs directly into a motherboard fan header for speed control. The cable is 18 cm long, so routing in larger cases may require an extension. Magnetic suspension bearings reduce friction, but the thin wire can snag on sharp edges during installation.

12 V PWM header limits

Speed regulation depends on the motherboard’s PWM implementation; some headers cannot drive the fan below its minimum RPM. The 3.84 W draw is modest, yet multiple fans on a single header may exceed the header’s current rating. No USB or voltage-control alternative is provided.

Highlights

  • Moves 40.8 CFM of air for steady case cooling
  • Magnetic suspension bearing cuts friction for quieter operation
  • Runs on 12 V drawing only 0.32 A for low power draw
  • Compact 80 x 80 x 25 mm frame fits tight builds
  • 18 cm lead with 4-pin connector enables PWM control

Specifications

TypeCase Fan

Questions about this item

How can I confirm the MF80201VX-Q010-S99 is running correctly after installation?

Connect the 4-pin connector to a motherboard header, then check BIOS or monitoring software for a stable RPM reading and feel for steady airflow from the 80×80×25 mm frame.

What comes in the box with the MF80201VX-Q010-S99 and what must I buy separately?

The fan unit with its 18 cm lead and 4-pin connector is included; mounting screws and any fan hub or splitter are not supplied.

Which version of the MF80201VX-Q010-S99 should I choose for a 12 V header?

This model is rated for DC 12 V at 3.84 W (0.32 A) with a magnetic suspension bearing, matching standard 12 V 4-pin headers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.