We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 22-gauge 4-conductor alarm cable in 500ft pull box

NavePoint

NavePoint Security Alarm Cable 22/4 22AWG 500ft White

SKU CH-R5VA-D8FYR

Four-conductor 22 AWG stranded cable in a 500 ft pull box for wiring alarm sensors and keypads

  • TypeSecurity / Burglar Alarm
  • ColorWhite
  • 22 AWG stranded conductors suit low-voltage security wiring
  • Four conductors in one round cable simplify sensor hookups
  • 500-foot pull-box length covers whole-home installations
  • White jacket blends with walls and ceilings
  • Pull-out box design speeds cable pulls and storage

NavePoint 22/4 Alarm Cable 500ft

This 22-gauge stranded cable is designed for residential and light-commercial security installations. It carries signals from door and window contacts, motion detectors and keypads back to the alarm panel. The four conductors support typical zone wiring and auxiliary power runs. It is not suited for high-voltage mains circuits or long-distance data networking.

Capacity and Headroom

The 500-foot pull box provides enough length for whole-house perimeter wiring with slack for terminations. Four unshielded conductors handle standard sensor loops and keypad buses comfortably. Voltage drop limits practical runs for powered devices such as powered detectors or sirens. The cable lacks shielding, so it is not intended for environments with strong electromagnetic interference.

Build Quality and Connectors

Stranded conductors make the wire flexible for routing through studs, conduit and tight corners. The white jacket blends with common trim and ceiling colours for discreet surface runs. A pull-out box pays out cable smoothly without tangles during installation. No connectors are included; terminations are made with screw terminals, crimp connectors or punch-down blocks on site.

Highlights

  • 22 AWG stranded conductors suit low-voltage security wiring
  • Four conductors in one round cable simplify sensor hookups
  • 500-foot pull-box length covers whole-home installations
  • White jacket blends with walls and ceilings
  • Pull-out box design speeds cable pulls and storage

Specifications

BrandNavePoint
TypeSecurity / Burglar Alarm
ColorWhite

Questions about this item

Will the 22AWG 4-conductor cable reach all my sensors on a single 500ft run?

The 500ft pull box provides enough length for most residential sensor layouts; plan each drop and cut only what you need.

How do I verify the stranded conductors are making solid contact after I punch them down?

Strip each conductor cleanly, seat it fully in the terminal block, and tug gently — no movement means a reliable connection.

Does the pull-out box include connectors or terminals, or do I buy those separately?

Only the 500ft 22/4 unshielded cable is supplied; terminals, connectors and any mounting hardware must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.