NavePoint
NavePoint Cat6 UTP Patch Cable 1ft 10Gbps Blue 10-Pack
Ten one-foot Cat6 UTP patch cables with snagless boots, gold-plated RJ45 plugs and 24 AWG stranded copper rated for 10 Gbps at 250 MHz
- ColorBlue
- 10 cables per pack for multiple connections
- Snagless boots protect clips during installation
- 10 Gbps rated speed supports Gigabit networks
- 24 AWG stranded copper for flexible routing
- Gold-plated RJ45 contacts resist corrosion
Universal RJ45 connectivity
This ten-pack of NavePoint Cat6 UTP patch cables provides universal RJ45 connectors for any standard LAN device. Each cable is one foot long and terminated with gold-plated contacts and strain-relief boots. The snagless design protects the locking tab during frequent moves. Stranded copper conductors and a durable PVC jacket suit everyday patching tasks.
10 Gbps rated performance
The cables are tested to a 250 MHz bandwidth and support data rates up to 10 Gbps. They meet 10/100/1000 Base-T specifications for Gigabit Ethernet networks. Conductor resistance is specified at 117 Ohm/km using 24 AWG stranded wire with HD-PE insulation. UL listing confirms compliance with recognised safety standards.
Installers needing short, pre-made runs
These one-foot cables suit technicians patching hubs to distribution panels or connecting workstations to nearby wall outlets. Buyers who need longer reach, shielded construction, or a different jacket colour should look at other options. The ten-pack format is intended for multiple drops rather than single-cable purchases.
Highlights
- 10 cables per pack for multiple connections
- Snagless boots protect clips during installation
- 10 Gbps rated speed supports Gigabit networks
- 24 AWG stranded copper for flexible routing
- Gold-plated RJ45 contacts resist corrosion
Specifications
| Brand | NavePoint |
|---|---|
| Color | Blue |
Questions about this item
What does the 10 Gbps rating mean once the cable is plugged into my router and PC?
It supports up to 10 Gbps data transfer on Cat6 links, so a 10G-capable router and network card can run at full Gigabit or 10 Gigabit speeds over this 1 ft run.
What interface standard does the RJ45 connector follow and what speed does it cap at?
The universal RJ45 plugs match the Cat6 specification and are rated for 250 MHz bandwidth, which caps practical throughput at 10 Gbps for short distances.
What physical clearance do the snagless boots need to fit side-by-side on a patch panel?
Each boot adds a small over-mould behind the RJ45 tab; allow roughly the width of a standard keystone port so the 24 AWG stranded cable and boot sit flush without blocking adjacent ports.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



