We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray snagless Cat6 patch cable with RJ45 connectors, 50 ft length

NavePoint

NavePoint Cat6 UTP Ethernet Network Patch Cable 50 FT 10 Gbps Gray

SKU CH-25PP-PMDWE

A 50 ft Cat6 UTP patch cable with snagless RJ45 connectors, stranded copper conductors and gold-plated contacts rated for 10 Gbps at 250 MHz

  • ColorGray
  • Snagless boots protect connectors during installation
  • Stranded 24 AWG copper with HD-PE insulation reduces signal loss
  • Gold-plated RJ45 plugs ensure reliable contact
  • 250 MHz bandwidth supports 10 Gbps data rates
  • 50 ft length reaches distant network devices

NavePoint Cat6 Patch Cable 50 FT

This NavePoint Cat6 UTP patch cable runs 50 feet and carries data at up to 10 Gbps. The stranded 24 AWG copper conductors and HD-PE insulation support a 250 MHz bandwidth. Snagless boots protect the gold-plated RJ45 connectors during repeated plug cycles. The gray PVC jacket resists wear in home or office installations.

Suits installers needing a 50-foot Cat6 link

The 50-foot length fits typical room-to-room or desk-to-panel runs where a single cable must bridge the gap. Builders who need a shorter patch cord or a longer permanent-installation reel should look at something else. The UTP construction serves standard indoor environments without shielding requirements.

10 Gbps rated throughput

The cable is specified for a maximum transfer speed of 10 Gbps over its 50-foot span. That figure decides whether the link meets the performance target for a given Gigabit or 10 Gigabit network segment.

Highlights

  • Snagless boots protect connectors during installation
  • Stranded 24 AWG copper with HD-PE insulation reduces signal loss
  • Gold-plated RJ45 plugs ensure reliable contact
  • 250 MHz bandwidth supports 10 Gbps data rates
  • 50 ft length reaches distant network devices

Specifications

BrandNavePoint
ColorGray

Questions about this item

Does the 50 FT cable come with any extra connectors or tools, or is it ready to plug in?

The cable arrives with gold-plated RJ45 connectors and strain-relief boots already fitted on both ends, so no extra parts or tools are needed.

When should I choose the 50 FT length instead of a shorter or longer run?

Choose the 50 FT length when the distance between your device and the wall outlet, switch or router is close to that span; shorter runs reduce slack while longer runs risk exceeding the 100 metre channel limit.

What does the 10 Gbps rating mean once the cable is installed in a 1000 Base-T network?

The cable supports up to 10 Gbps at 250 MHz bandwidth, but on a 1000 Base-T link the connection will negotiate to 1 Gbps, so the headroom ensures reliable gigabit performance with margin for future upgrades.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.