We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black snagless Cat6 UTP patch cable 50 FT with gold RJ45 connectors and strain relief boots

NavePoint

NavePoint Cat6 UTP Ethernet Network Patch Cable 50 FT 10 Gbps Black

SKU CH-BSJQ-TNT3G

A 50-foot Cat6 UTP patch cable with snagless RJ45 connectors rated for 10 Gbps at 250 MHz

  • ColorBlack
  • Snagless boots protect the connector tabs during installation
  • Stranded 24 AWG copper conductors deliver 10 Gbps throughput
  • Gold-plated RJ45 contacts ensure reliable signal transfer
  • HD-PE insulation reduces loss at 250 MHz bandwidth
  • 50-foot length connects devices across rooms or racks

Universal RJ45 Cat6 cable for LAN devices

This 50 FT Cat6 UTP patch cable uses stranded copper conductors and gold-plated RJ45 connectors to link servers, computers, routers, switches, VoIP phones and network media players. The snagless boots protect the latch during repeated insertion and removal. It is designed for Gigabit networks and patches hubs to distribution panels or workstations to wall outlets.

Thermals, noise and power draw in normal use

As a passive copper cable it generates no heat, produces no audible noise and draws no electrical power during operation. The PVC jacket and HD-PE insulation maintain signal integrity without active cooling. Strain relief boots on both ends reduce mechanical stress on the connectors.

10 Gbps maximum transfer speed decides suitability

The cable is rated for a maximum data transfer rate of 250 MHz and a maximum transfer speed of 10 Gbps, making it appropriate for 10/100/1000 Base-T networks. Buyers who need higher bandwidth or longer runs beyond the rated length should consider alternative cabling categories.

Highlights

  • Snagless boots protect the connector tabs during installation
  • Stranded 24 AWG copper conductors deliver 10 Gbps throughput
  • Gold-plated RJ45 contacts ensure reliable signal transfer
  • HD-PE insulation reduces loss at 250 MHz bandwidth
  • 50-foot length connects devices across rooms or racks

Specifications

BrandNavePoint
ColorBlack

Questions about this item

How do I install the 50 FT Cat6 patch cable without damaging the RJ45 connectors?

Route the 50 FT cable along the desired path, then press each gold-plated RJ45 connector firmly into the port until the snagless boot clicks; the strain-relief boot protects the 24 AWG stranded copper from bending stress at the jack.

What maintenance or replacement will the Cat6 UTP cable need over time?

Inspect the PVC jacket and snagless boots periodically for cracks or kinks; replace the cable if the 117 Ohm/km conductor resistance rises due to physical damage or if the gold-plated contacts show corrosion.

What limit appears first when running sustained 10 Gbps traffic over the 50 FT length?

The 250 MHz bandwidth ceiling of the Cat6 specification is reached before the 50 FT distance degrades the 10 Gbps signal, so sustained throughput tops out at the rated 250 MHz channel capacity.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.