We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray snagless Cat6 patch cable 25 ft with gold RJ45 connectors and strain relief boots

NavePoint

NavePoint Cat6 UTP Ethernet Network Patch Cable 25 FT 10 Gbps Gray

SKU CH-33J6-21KBC

A 25 ft Cat6 patch cable with snagless RJ45 connectors supports up to 10 Gbps over 250 MHz bandwidth

  • ColorGray
  • 10 Gbps maximum transfer speed for fast data throughput
  • 250 MHz bandwidth rating supports high-frequency signals
  • Snagless boot design protects connector tabs during installation
  • 24 AWG stranded copper conductors with gold-plated contacts ensure reliable connectivity
  • UL Listed certification verifies safety compliance for permanent installations

What this cable does and who needs it

The NavePoint Cat6 UTP patch cable provides a 25 ft gray link rated for 10 Gbps data transfer at 250 MHz bandwidth. It suits installers and home users who need a reliable Gigabit-or-faster connection between routers, switches, servers, VOIP phones or media players without running bulk cable.

Behaviour under sustained load

Stranded 24 AWG copper conductors with HD-PE insulation keep signal loss low across the full length, while gold-plated RJ45 contacts resist oxidation during continuous 10/100/1000 Base-T traffic. The 117 Ohm/km DC resistance spec confirms stable performance for extended streaming or backup sessions rather than brief bursts.

The spec that decides fit

Maximum transfer speed is 10 Gbps at 250 MHz, so the cable matches Cat6 infrastructure but will not exceed that ceiling; buyers needing certified Cat6a or higher bandwidth should look elsewhere.

Highlights

  • 10 Gbps maximum transfer speed for fast data throughput
  • 250 MHz bandwidth rating supports high-frequency signals
  • Snagless boot design protects connector tabs during installation
  • 24 AWG stranded copper conductors with gold-plated contacts ensure reliable connectivity
  • UL Listed certification verifies safety compliance for permanent installations

Specifications

BrandNavePoint
ColorGray

Questions about this item

Does the 24 AWG stranded copper cable generate noticeable heat or consume extra power when run continuously at 10 Gbps?

No — the cable is passive copper with 117 Ohm/km resistance and draws no power itself; any heat comes only from the connected ports.

What devices must I already own to use the RJ45 connectors on this 25 ft patch cord?

Any standard LAN equipment with RJ45 ports — routers, switches, servers, computers, VoIP phones or network media players — will accept the universal connectors.

Will this Cat6 cable work reliably alongside older 10/100 Base-T gear I still have in the rack?

Yes, it is backward compatible with 10/100/1000 Base-T networks, so legacy devices connect at their rated speeds while the cable supports up to 10 Gbps on newer hardware.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.