We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Cat6 UTP patch cable 100 FT with snagless RJ45 connectors and gold contacts

NavePoint

NavePoint Cat6 UTP Ethernet Network Patch Cable 100 FT 10 Gbps Blue

SKU CH-RN4H-PR5AA

A 100-foot Cat6 UTP patch cable with stranded copper conductors, gold-plated RJ45 connectors and snagless boots rated for 10 Gbps at 250 MHz

  • ColorBlue
  • Snagless boots protect the clip during frequent moves
  • Stranded 24 AWG copper conductors keep the cable flexible
  • 250 MHz bandwidth supports 10 Gbps data rates
  • Gold-plated RJ45 contacts resist corrosion for stable links
  • 100 ft length reaches distant wall outlets or patch panels

Cable purpose and fit

This Cat6 UTP patch cable delivers up to 10 Gbps data transfer over a 100 FT run. It suits installers wiring servers, computers, routers, switch boxes, VOIP phones or network media players in Gigabit networks. The stranded copper construction and snagless boots make it practical for routing through cabinets and along cable trays. Universal RJ45 plugs connect any standard LAN device that calls for Cat6.

Speed-defining specification

The cable is rated for 250 MHz bandwidth and a maximum transfer speed of 10 Gbps. It uses 24 AWG stranded copper conductors with 7*0.18 mm strands and HD-PE insulation, yielding 117 Ohm/km DC resistance. Gold-plated contacts and a durable PVC jacket complete the link. These figures decide whether the run meets your throughput target.

Build integration

The snagless strain-relief boots protect the latch during pulls through tight pathways, while the flexible stranded conductors ease bends around corners. No external power or configuration is required; the patch cord simply bridges two RJ45 ports. It frees the installer from terminating bulk cable on site and works with existing 10/100/1000 Base-T equipment.

Highlights

  • Snagless boots protect the clip during frequent moves
  • Stranded 24 AWG copper conductors keep the cable flexible
  • 250 MHz bandwidth supports 10 Gbps data rates
  • Gold-plated RJ45 contacts resist corrosion for stable links
  • 100 ft length reaches distant wall outlets or patch panels

Specifications

BrandNavePoint
ColorBlue

Questions about this item

What does the 250 MHz bandwidth actually deliver when the cable is installed?

The 250 MHz rating supports data rates up to 10 Gbps on Gigabit networks, giving you headroom for 10/100/1000 Base-T traffic across the full 100 ft length.

How does the RJ45 connector limit the maximum speed in practice?

The universal RJ45 plugs are rated for Cat6 performance, so they pass the full 10 Gbps signal without becoming the bottleneck on any standard LAN port.

What clearance and mounting features does the 100 ft cable need?

Snagless strain-relief boots protect the RJ45 tabs during routing, while the flexible 24 AWG stranded copper and PVC jacket let the cable bend around corners and through cable managers without kinking.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.