We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NavePoint

NavePoint CAT6 Plenum CMP White 1000 Ft 23AWG Solid Copper Ethernet Cable

SKU CH-F9M8-ADHDD

Plenum-rated Cat6 bulk cable with solid copper conductors for in-wall gigabit runs

  • TypeEthernet Crossover Raw
  • CatCategory 6 (Cat6)
  • ColorWhite
  • Plenum CMP rating meets strict fire-safety codes for in-wall runs
  • 23 AWG solid bare copper conductors deliver lower resistance than CCA alternatives
  • 250 MHz tested bandwidth supports Gigabit Ethernet throughout the 1000 ft length
  • Foot-marked jacket enables quick custom-length cuts during installation
  • Pull-box packaging prevents tangles and speeds deployment on the job site

Category 6 Plenum cable for indoor installs

This NavePoint CAT6 plenum-rated bulk cable uses 23AWG solid bare copper conductors in four unshielded twisted pairs. The CMP jacket meets fire-safety requirements for air-handling spaces, making it suitable for commercial and residential runs where plenum rating is mandated. The 1000 ft pull-box includes one-foot markings for custom length cuts.

250 MHz standard limits bandwidth headroom

Category 6 specifications top out at 250 MHz, so this cable cannot carry the higher frequencies used by Category 6A or Category 7 links. The 400 MHz figure cited in marketing reflects internal test margins, not a ratified standard, and equipment negotiated at gigabit speeds will not exceed the 250 MHz channel limit.

1000 ft reel covers large jobs.

The 1000-foot length supplies enough cable for multiple drops across a floor or small building. Each horizontal run must stay within the 100 metre channel limit set by the Category 6 standard, so very long single pulls will require intermediate switching or a higher-category cable.

Highlights

  • Plenum CMP rating meets strict fire-safety codes for in-wall runs
  • 23 AWG solid bare copper conductors deliver lower resistance than CCA alternatives
  • 250 MHz tested bandwidth supports Gigabit Ethernet throughout the 1000 ft length
  • Foot-marked jacket enables quick custom-length cuts during installation
  • Pull-box packaging prevents tangles and speeds deployment on the job site

Specifications

BrandNavePoint
TypeEthernet Crossover Raw
CatCategory 6 (Cat6)
ColorWhite

Questions about this item

What is the difference between the 23 AWG solid copper and a thinner gauge?

The 23 AWG solid bare copper conductors provide lower resistance than thinner gauges, supporting reliable performance over the full 100 metre channel distance for Gigabit Ethernet and PoE applications.

What does the 250 MHz rating mean for actual network speed?

The 250 MHz bandwidth meets the Category 6 standard and supports 1 Gbps speeds up to 100 metres; the cable can carry signals up to 400 MHz for headroom on shorter runs.

How does the CMP plenum jacket affect where I can run this cable?

The CMP rating means the jacket passes strict fire safety tests for low smoke and flame spread, so the cable is approved for installation in plenum air spaces such as above drop ceilings or below raised floors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.