We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twenty white right-angle CAT6 keystone jacks in a pack

NavePoint

NavePoint CAT6 Keystone Jack Right Angle White 20-pack

SKU CH-WSE3-XSN5N

Twenty right-angle CAT6 keystone jacks with gold-plated contacts and dual IDC covers for 23 or 24 AWG solid cable

  • TypeJack
  • ColorWhite
  • Right-angle design eases termination in tight spaces
  • 20 jacks support multiple solid 23 or 24 AWG cable runs
  • Gold-plated RJ45 contacts resist corrosion for reliable signal
  • TIA/EIA 568-C.2 verified for Category 6 performance
  • Snap-in clip plus dual IDC covers secure connections and aid strain relief

20-pack CAT6 right-angle keystone jacks

These white keystone jacks come in a 20-pack and accept solid 23 or 24 AWG cables for Category 6 networks. They fit standard keystone openings in patch panels or wall plates. The 90-degree right-angle design eases termination in tight spaces. Gold-plated RJ45 contacts and fire-retardant thermoplastic construction meet TIA/EIA 568-C.2 performance requirements.

Dual IDC covers and dust caps included

Each jack ships with dual IDC covers that accept 110 or Krone impact tools for punch-down wiring. Colour-coded labels support both T568A and T568B schemes on the same module. Snap-in retaining clips hold the jack firmly in the panel opening. Dust caps remain on the cable entry to assist with strain relief after termination.

Verify keystone cut-outs and cable type

Confirm your patch panel or wall plate uses standard keystone cut-outs before ordering. These jacks are designed for solid-conductor 23 or 24 AWG cable only; stranded patch cord wire will not terminate reliably. Ensure you have a compatible 110 or Krone punch-down tool available. The right-angle orientation requires sufficient rear clearance behind the mounting surface.

Highlights

  • Right-angle design eases termination in tight spaces
  • 20 jacks support multiple solid 23 or 24 AWG cable runs
  • Gold-plated RJ45 contacts resist corrosion for reliable signal
  • TIA/EIA 568-C.2 verified for Category 6 performance
  • Snap-in clip plus dual IDC covers secure connections and aid strain relief

Specifications

BrandNavePoint
TypeJack
ColorWhite

Questions about this item

Will the gold-plated RJ45 contacts or dual IDC modules need replacement after repeated re-terminations?

The gold-plated RJ45 contacts and dual IDC modules are built into each keystone jack; they are not designed to be serviced or swapped out individually. If a contact or IDC module is damaged, the whole jack is replaced.

What is the first performance limit reached when all twenty jacks carry sustained Gigabit traffic?

Each jack meets or exceeds Category 6 performance per TIA/EIA 568-C.2, so the link speed and crosstalk margins defined by that standard are the governing limits under continuous load.

How much heat do the thermoplastic housings generate when the pack is terminated and powered all day?

The jacks are passive components with no active circuitry, so they produce no measurable heat during normal operation regardless of how long they remain connected.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.