We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five black CAT6 ethernet cables with RJ45 connectors, 7 ft each

NavePoint

NavePoint CAT6 F/UTP 26AWG 7 Ft 5 pack Black network ethernet cable

SKU CH-P6N1-CJ5RB

Five black shielded CAT6 patch cables, each 7 ft long with 26 AWG stranded copper conductors, rated for 10 Gbps on 10/100/1000 Base-T networks

  • ColorBlack
  • CAT6 rating supports up to 10 Gbps data transfer
  • Foil shielding resists oxidation and corrosion for stable signal
  • 26 AWG stranded copper with PVC jacket withstands repeated bending
  • RJ45 connectors fit PCs, routers, consoles, NAS and VoIP phones
  • Five 7-foot cables included for multi-device wiring

Universal LAN patch cord

The NavePoint CAT6 F/UTP cable comes in a 7 Ft length and a 5 pack. Each cord uses a stranded copper conductor with a 26AWG gauge and RJ45 connectors. It is built for PC, laptop, server, printer, router, modem, NAS, VoIP phone, game consoles, smart TV and patch panel connections. The black PVC jacket adds durability for home or engineering use.

Simple plug and play

Installation only requires inserting the RJ45 plugs into compatible ports until they click. The strain relief boots protect the termination point from bending stress during routing. A common issue arises if the latch tab snaps off after repeated removal, leaving the connector loose in the port. Ensure the cable path avoids sharp bends that could damage the internal HD-PE insulation.

CAT6 bandwidth ceiling

The cable supports 10/100/1000 Base-T networks and transmits data at speeds up to 10 Gbps. Performance relies on the F/UTP shielding and conductor DC resistance of 14.3 Ohm/km with insulation resistance above 5000 Ohm/km. It will not exceed the CAT6 standard frequency limits or compensate for longer runs beyond the specified 7 Ft. Buyers needing extended distances or higher category ratings must select a different cable class.

Highlights

  • CAT6 rating supports up to 10 Gbps data transfer
  • Foil shielding resists oxidation and corrosion for stable signal
  • 26 AWG stranded copper with PVC jacket withstands repeated bending
  • RJ45 connectors fit PCs, routers, consoles, NAS and VoIP phones
  • Five 7-foot cables included for multi-device wiring

Specifications

BrandNavePoint
ColorBlack

Questions about this item

How can I verify the CAT6 patch cable is performing at 10 Gbps after connecting it?

Connect the cable between two 10 Gbps capable devices and run a network speed test; the link should negotiate at 10 Gbps with low latency and no packet loss.

What comes in the 5 pack and do I need separate connectors?

The pack contains five 7 ft black CAT6 F/UTP cables with RJ45 plugs already crimped on both ends; no extra connectors or tools are required.

Which cable version should I choose for a 10/100/1000 Base-T home network?

The CAT6 F/UTP 26AWG version supplied supports 10/100/1000 Base-T and up to 10 Gbps, making it suitable for that network.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.