We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five white CAT6 patch cables with RJ45 connectors, 10 ft each

NavePoint

NavePoint CAT6 F/UTP 26AWG 10 Ft 5 pack White network ethernet cable

SKU CH-Z15J-7K6MM

A five-pack of 10-foot white CAT6 patch cables with foil shielding, 26AWG stranded copper conductors and RJ45 connectors for 10/100/1000 Base-T networks

  • ColorWhite
  • CAT6 rating supports up to 10 Gbps for fast data transfers
  • Foil shielding (F/UTP) resists oxidation and corrosion for stable signals
  • 26 AWG stranded copper with PVC jacket and strain relief boots for durability
  • 10 ft length in a 5-pack simplifies multi-device setups
  • Universal RJ45 connectors work with PCs, routers, consoles, servers and more

Universal RJ45 patch cords for home

This five-pack supplies ten-foot white cables with standard RJ45 plugs that fit any LAN port calling for CAT6. They connect PCs, laptops, servers, printers, routers, modems, NAS units, VoIP phones, consoles, smart TVs and patch panels without adapters. The stranded copper conductors and HD-PE insulation keep the link stable for streaming, browsing and gaming.

Low-loss construction keeps everyday runs cool

Foil shielding around unshielded twisted pairs resists oxidation and corrosion, reducing signal loss across the 10 ft length. The 26 AWG stranded wire and 14.3 Ohm/km conductor resistance limit heat rise during normal traffic. A tough PVC jacket and moulded strain-relief boots protect the terminations from daily plugging and unplugging.

Sustained 10 Gbps throughput on 10/100/1000 Base-T

The CAT6 rating supports up to 10 Gbps over the full cable length, so large file transfers and continuous HD streams hold speed without throttling. Insulation resistance above 5000 Ohm/km maintains signal integrity during prolonged loads. Builders needing longer runs, outdoor rating or higher-category bandwidth will need different cable.

Highlights

  • CAT6 rating supports up to 10 Gbps for fast data transfers
  • Foil shielding (F/UTP) resists oxidation and corrosion for stable signals
  • 26 AWG stranded copper with PVC jacket and strain relief boots for durability
  • 10 ft length in a 5-pack simplifies multi-device setups
  • Universal RJ45 connectors work with PCs, routers, consoles, servers and more

Specifications

BrandNavePoint
ColorWhite

Questions about this item

How do I install the RJ45 connectors on this CAT6 cable and what step is often missed?

Push each RJ45 plug firmly into the port until the tab clicks; the step people miss is not seating the strain-relief boot fully, which can leave the latch loose and cause intermittent 10/100/1000 Base-T links.

What maintenance or replacement will this 26AWG patch cord need over time?

Inspect the PVC jacket and strain-relief boots for cracks or kinks; replace the cable if the insulation resistance drops below 5000 Ohm/km or if the stranded copper conductor shows corrosion at the contacts.

What limit appears first when this cable runs at 10 Gbps continuously?

The 14.3 Ohm/km DC resistance of the 26AWG stranded copper conductor increases insertion loss, so the 100-metre channel limit for 10 Gbps is reached before the 1000 Base-T distance ceiling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.