We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five orange CAT6 patch cables with RJ45 connectors and strain relief boots, 10 foot length

NavePoint

NavePoint CAT6 F/UTP 26AWG 10 Ft 5 pack Orange network ethernet cable

SKU CH-C055-5AJ17

A pack of five 10 ft orange CAT6 F/UTP 26AWG patch cables with RJ45 connectors for 10/100/1000 Base-T networks up to 10 Gbps

  • ColorOrange
  • Stable connections thanks to oxidation-resistant construction
  • 10 Gbps data rates on 10/100/1000 Base-T networks
  • 10 Ft length suits typical desk-to-router runs
  • Five cables per pack for multi-device setups
  • Broad device compatibility from PCs to game consoles

Five orange patch cables for wired LANs

This five-pack supplies ten-foot CAT6 F/UTP cables with RJ45 ends for connecting PCs, servers, routers, switches, printers, NAS units, VoIP phones, game consoles and smart TVs to a wired network. The orange jackets make cable runs easy to identify in crowded racks or behind desks. Each cord uses 26 AWG stranded copper conductors and an HD-PE insulator rated above 5000 Ohm/km insulation resistance. The 406627 model delivers up to 10 Gbps on 10/100/1000 Base-T links.

Fits standard RJ45 ports without adapters

Plug directly into any device that accepts a CAT6 patch cord — no special sockets, transceivers or configuration required. Stranded conductors and strain-relief boots tolerate frequent re-routing and tight bends inside cabinets or cable trays. The PVC jacket resists oxidation and corrosion, keeping contact resistance low at 14.3 Ohm/km. Ten-foot length reaches from wall plates to equipment without excess slack that blocks airflow.

Sustains gigabit throughput over long runs

The F/UTP foil shield and HD-PE insulation limit crosstalk and signal loss during continuous 10 Gbps transfers such as large backups, HD video streaming or extended gaming sessions. Conductor DC resistance stays stable at 14.3 Ohm/km, so latency and packet error rates do not climb when the link is saturated for hours. Booted connectors maintain positive latch force after hundreds of insertions, preventing intermittent disconnects under vibration.

Highlights

  • Stable connections thanks to oxidation-resistant construction
  • 10 Gbps data rates on 10/100/1000 Base-T networks
  • 10 Ft length suits typical desk-to-router runs
  • Five cables per pack for multi-device setups
  • Broad device compatibility from PCs to game consoles

Specifications

BrandNavePoint
ColorOrange

Questions about this item

Does the 26 AWG stranded copper conductor limit the run length before signal loss becomes an issue?

The cable is rated for 10 Gbps transmission and tested with 14.3 Ohm/km DC resistance and insulation resistance above 5000 Ohm/km, supporting standard 100 m channel distances.

How much heat or noise does the cable generate when carrying continuous 1 Gbps traffic all day?

A passive copper patch cord produces no audible noise and negligible heat; the PVC jacket and stranded conductors remain at ambient temperature under sustained load.

What equipment must I already have for these RJ45 cables to work?

Any device with a standard RJ45 LAN port — router, switch, PC, server, printer, NAS, VoIP phone, game console or smart TV — will connect directly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.