We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five blue CAT6 patch cables with RJ45 connectors and strain relief boots, 1 foot each

NavePoint

NavePoint CAT6 F/UTP 26AWG 1 Ft 5 pack Blue

SKU CH-8N7X-VB68V

Five shielded CAT6 patch cords, each 1 ft long with stranded copper conductors and RJ45 connectors for 10/100/1000 Base-T networks

  • ColorBlue
  • Stable signal with oxidation-resistant F/UTP shielding
  • 10 Gbps data rate for 4K streaming and gaming
  • 26 AWG stranded copper with 14.3 Ohm/km conductor resistance
  • 5000 Ohm/km insulation resistance for low signal loss
  • Five 1 ft cables with strain-relief boots for tight installs

Run Patch Cable Pack

This five-pack of blue CAT6 F/UTP cables measures one foot each, designed for tight rack or desk connections. The 26 AWG stranded copper conductors and foil shielding support 10/100/1000 Base-T networks with low signal loss. RJ45 connectors with strain-relief boots ensure a secure fit on standard LAN ports.

Installers Needing Multiple Short Links

Suits technicians wiring patch panels, VoIP phones, consoles or smart TVs in close proximity where longer cables would create clutter. Not for runs exceeding the one-foot length, outdoor burial, or installations requiring solid-core cable for in-wall use.

10 Gbps Rated CAT6 Performance

Rated for data rates up to 10 Gbps, the cable meets the decisive speed threshold for modern gigabit and ten-gigabit local networks. The 14.3 Ω/km conductor resistance and 5000 Ω/km insulation resistance back the claimed throughput.

Highlights

  • Stable signal with oxidation-resistant F/UTP shielding
  • 10 Gbps data rate for 4K streaming and gaming
  • 26 AWG stranded copper with 14.3 Ohm/km conductor resistance
  • 5000 Ohm/km insulation resistance for low signal loss
  • Five 1 ft cables with strain-relief boots for tight installs

Specifications

BrandNavePoint
ColorBlue

Questions about this item

What connector type does the 26AWG CAT6 cable use for LAN devices?

The cable uses universal RJ45 connectors that fit any standard LAN port requiring CAT6, including routers, switches, servers, and VoIP phones.

How should the strain-relief boots be handled during installation to avoid damaging the latch?

Press the RJ45 plug straight into the port until the latch clicks; do not pull on the boot to seat the connector, as that can bend the latch and cause intermittent contact.

When should the 1 ft patch cords be inspected or replaced in a typical installation?

Inspect the boots and RJ45 latches whenever you re-patch a port; replace any cable showing cracked PVC jacket, deformed boots, or a latch that no longer clicks securely.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.