We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NavePoint

NavePoint CAT6 CCA UTP 23AWG 550MHz Yellow 1000ft

SKU CH-AQ6J-3TTHB

Solid 23 AWG CCA UTP cable rated to 550 MHz, supplied as a 1000 ft bulk reel for structured Category 6 wiring

  • TypeEthernet Crossover Raw
  • ColorYellow
  • Solid 23 AWG conductors for reliable signal integrity
  • CCA construction keeps material cost lower than solid copper
  • Category 6 rated to 550 MHz for high-bandwidth applications
  • Unshielded twisted-pair design simplifies termination and routing
  • 1000 ft bulk reel suits whole-building wiring projects

Bulk CAT6 CCA cable for on-site wiring

This NavePoint Category 6 cable uses copper-clad aluminium conductors in a 23 AWG solid construction. It comes as a 1000 ft yellow reel of unshielded twisted pair for bulk installation. The jacket is rated for general indoor use and the cable is tested to 550 MHz bandwidth.

Suited for new horizontal runs in homes or offices

Installers pulling cable for VoIP phones, IP cameras, printers, gaming consoles, switches or router links will find the length and colour coding practical. Builders who need shielded cable, plenum-rated jacket or pure copper conductors for PoE loads beyond the CCA rating should look at something else.

550 MHz tested bandwidth is the deciding spec

The 550 MHz figure confirms the cable meets Category 6 transmission requirements for gigabit Ethernet. If your design requires certified performance above that frequency or a different fire rating, this reel will not satisfy the spec.

Highlights

  • Solid 23 AWG conductors for reliable signal integrity
  • CCA construction keeps material cost lower than solid copper
  • Category 6 rated to 550 MHz for high-bandwidth applications
  • Unshielded twisted-pair design simplifies termination and routing
  • 1000 ft bulk reel suits whole-building wiring projects

Specifications

BrandNavePoint
TypeEthernet Crossover Raw
ColorYellow

Questions about this item

How does the 550 MHz rating translate to real-world bandwidth for a 1000 ft run?

The 550 MHz bandwidth supports Category 6 performance up to gigabit speeds; actual throughput depends on installation quality and connected equipment.

What does the CCA UTP construction mean for PoE and termination standards?

Copper-clad aluminium conductors suit data runs but are not recommended for Power over Ethernet; solid 23 AWG wires terminate in standard Category 6 IDC contacts.

What physical space and bend radius does a 1000 ft pull box of 23 AWG solid cable need?

The pull box feeds 4-pair solid 23 AWG cable; allow generous bend radius and conduit fill for the stiffer solid conductors during installation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.