NavePoint
NavePoint Cat5e UTP Patch Cable 5ft 1Gbps Gray 10-Pack
Ten snagless Cat5e patch cables, each five feet long, rated for 1 Gbps and 100 MHz bandwidth with 24 AWG stranded copper conductors and gold-plated RJ45 connectors
- ColorGray
- Snagless boots protect the latch during frequent moves
- 24 AWG stranded copper conductors give flexible, durable runs
- Gold-plated RJ45 contacts resist corrosion for steady signals
- Tested to 100 MHz bandwidth for 1 Gbps throughput
- Ten cables in one pack simplify multi-drop installs
Universal 1 Gbps Ethernet patch cords
This ten-pack of NavePoint Cat5e UTP cables supplies five-foot gray cords for wiring workstations, VoIP phones, routers and other RJ45 devices. Stranded 24 AWG copper conductors with HD-PE insulation support data rates up to 100 MHz and 1 Gbps throughput. Gold-plated contacts and snagless strain-relief boots protect the connection during repeated insertions. The cables carry UL listing for safety compliance.
Suits gigabit networks needing bulk five-foot runs
Installers patching hubs, distribution panels or wall outlets at 10/100/1000 Base-T speeds will find the length and quantity convenient. Builders who require shielded cable, longer individual runs, or transmission beyond 1 Gbps must choose a different product category. The unshielded UTP design also limits use in electrically noisy environments.
Rated for 1 Gbps over Cat5e UTP
The decisive specification is the 1 Gbps maximum transfer speed on a 100 MHz Cat5e channel. This ceiling determines whether the cable meets the bandwidth demand of the target network. Any application requiring higher throughput needs a cable rated for a superior category.
Highlights
- Snagless boots protect the latch during frequent moves
- 24 AWG stranded copper conductors give flexible, durable runs
- Gold-plated RJ45 contacts resist corrosion for steady signals
- Tested to 100 MHz bandwidth for 1 Gbps throughput
- Ten cables in one pack simplify multi-drop installs
Specifications
| Brand | NavePoint |
|---|---|
| Color | Gray |
Questions about this item
Will the RJ45 connectors or strain-relief boots need replacing after repeated plugging?
The snagless boots protect the locking tab from breakage, so the connectors should survive normal daily insertion cycles without maintenance.
What limits throughput first on a continuous 1 Gbps link?
The cable is rated for 100 MHz bandwidth and 1 Gbps maximum transfer speed, so the 100 MHz spec is the ceiling under sustained load.
Does the 24 AWG stranded copper run warm or draw extra power on all-day PoE?
Conductor DC resistance is 117 Ohm/km; at 5 ft per cable the voltage drop is negligible and the PVC jacket stays cool during continuous operation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



