NavePoint
NavePoint Cat5e UTP Ethernet Patch Cable 100 FT Gray
A 100 ft Cat5e UTP patch cable with stranded copper conductors and gold-plated RJ45 connectors for 1 Gbps network connections
- ColorGray
- Snagless boots protect the RJ45 clip during frequent moves
- 1 Gbps throughput supports Gigabit Ethernet links
- 100 MHz bandwidth handles 1000 Base-T traffic
- Stranded 24 AWG copper conductors keep the cable flexible
- 100 FT length reaches distant wall outlets and switches
Universal patch cable for Gigabit networks
The NavePoint Cat5e UTP patch cable provides a 100 FT connection rated for 1 Gbps data transfer. Stranded copper conductors with 24 AWG gauge and HD-PE insulation deliver stable signals up to 100 MHz. Gold-plated RJ45 connectors with strain relief boots ensure a secure fit in any standard LAN port. It suits installers who need a long, reliable run for home or office networking.
Replaces shorter or slower Cat5 runs
When existing cables limit speed to 100 Mbps or cannot reach distant devices, this 100 FT assembly restores full Gigabit throughput. The 117 Ohm/km conductor resistance and 7*0.18 mm stranding reduce signal loss over the full length. Snagless boots protect the locking tab during repeated moves, so the upgrade stays intact through reconfigurations.
Ideal for fixed Gigabit links between rack.
Builders wiring servers, routers, switches, VoIP phones or media players gain a tidy gray cable that fits universal RJ45 ports. Buyers who need shielded cable for high-interference environments, outdoor burial rating, or lengths beyond 100 FT should look at other categories. This model is purpose-built for indoor Cat5e patching only.
Highlights
- Snagless boots protect the RJ45 clip during frequent moves
- 1 Gbps throughput supports Gigabit Ethernet links
- 100 MHz bandwidth handles 1000 Base-T traffic
- Stranded 24 AWG copper conductors keep the cable flexible
- 100 FT length reaches distant wall outlets and switches
Specifications
| Brand | NavePoint |
|---|---|
| Color | Gray |
Questions about this item
What is the wire gauge and conductor construction of this 100 FT patch cable?
The cable uses 24 AWG stranded copper conductors built with seven strands of 0.18 mm wire for flexibility and signal integrity.
How do the snagless boots affect insertion into a crowded patch panel?
The moulded strain-relief boots cover the connector latch so it cannot catch on adjacent cables; press the boot tab down fully until the latch clicks into the RJ45 port.
Will the PVC jacket and gold-plated contacts need periodic replacement?
The jacket and contacts are rated for the life of the installation; replace the cable only if the jacket is kinked, cut, or the latch tab breaks off.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



