NavePoint
NavePoint Cat5e UTP Ethernet Network Patch Cable 75 FT Black
A 75 ft Cat5e UTP patch cable with snagless RJ45 connectors for 1 Gbps Ethernet connections
- ColorBlack
- Snagless boots protect the RJ45 tabs during frequent moves
- Stranded 24 AWG copper conductors keep the cable flexible for tight runs
- 100 MHz bandwidth supports 1 Gbps transfer speeds on Gigabit networks
- Gold-plated contacts resist corrosion for a stable signal over 75 FT
- UL Listed and 117 Ohm/km resistance meet safety and performance specs
Universal RJ45 patch cable
The NavePoint Cat5e UTP patch cable provides a 75 FT stranded copper link with gold-plated RJ45 connectors and strain relief boots. It is built for 10/100/1000 Base-T networks and carries a UL listing. The snagless design protects the locking tabs during frequent moves.
Home and office wired runs
This cable suits installers wiring workstations to wall outlets, patching hubs to distribution panels, or connecting VoIP phones and media players where a 75 FT reach is required. Builders needing longer permanent links, outdoor burial rating, or shielded twisted pair for high-EMI environments should select a different cable type.
Gigabit headroom and distance limit
The 24 AWG conductors with HD-PE insulation support 1 Gbps throughput at 100 MHz bandwidth over the full 75 FT length. Conductor resistance is rated at 117 Ohm/km. Performance drops beyond the 100 m channel limit, so runs longer than 75 FT plus patch cords will exceed Cat5e specifications.
Highlights
- Snagless boots protect the RJ45 tabs during frequent moves
- Stranded 24 AWG copper conductors keep the cable flexible for tight runs
- 100 MHz bandwidth supports 1 Gbps transfer speeds on Gigabit networks
- Gold-plated contacts resist corrosion for a stable signal over 75 FT
- UL Listed and 117 Ohm/km resistance meet safety and performance specs
Specifications
| Brand | NavePoint |
|---|---|
| Color | Black |
Questions about this item
What devices must I already have with RJ45 ports to use this 75 FT Cat5e patch cable?
You need two devices with standard RJ45 LAN ports — such as a router, switch, server, computer, VoIP phone or network media player — to connect with this cable.
Will this Cat5e cable work properly if I keep my older 10/100 Base-T equipment on the same network?
Yes, the cable supports 10/100/1000 Base-T so it will run at the highest speed both linked devices share, up to 1 Gbps.
How can I confirm the cable is delivering the rated 1 Gbps link after I plug it in?
Check the link lights on both ports; they should show a 1000 Mbps or Gigabit connection, and a speed test between the two devices should reach near 1 Gbps.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



