NavePoint
NavePoint Cat5e UTP Ethernet Network Patch Cable 50 FT Gray
A 50 ft Cat5e UTP patch cable with stranded copper conductors and gold-plated RJ45 connectors for 1 Gbps Ethernet connections
- ColorGray
- Snagless boots prevent connector damage during installation
- Stranded 24 AWG copper conductors deliver flexible durability
- Gold-plated RJ45 contacts ensure reliable signal transfer
- Supports 1 Gbps speeds on 10/100/1000 Base-T networks
- UL Listed safety certification for compliant installations
Universal RJ45 connectivity
This NavePoint Cat5e UTP patch cable provides a 50 FT gray link for 10/100/1000 Base-T networks. Rated for 1 Gbps transfer speed at 100 MHz, it serves servers, computers, routers, switches, VoIP phones and media players needing a standard LAN drop.
Snagless boots and gold contacts
Stranded 24 AWG copper conductors with HD-PE insulation sit inside a durable PVC jacket. Gold-plated RJ45 plugs and moulded strain-relief boots on both ends resist snags during routing and maintain low 117 Ohm/km DC resistance over repeated connect-disconnect cycles.
Verify port speed and run length
Confirm the target devices negotiate at 1 Gbps and that the 50 FT run stays within your structured-cabling allowance. The cable is UL Listed and unshielded, so avoid routing parallel to power conductors where alien crosstalk could degrade the 100 MHz channel.
Highlights
- Snagless boots prevent connector damage during installation
- Stranded 24 AWG copper conductors deliver flexible durability
- Gold-plated RJ45 contacts ensure reliable signal transfer
- Supports 1 Gbps speeds on 10/100/1000 Base-T networks
- UL Listed safety certification for compliant installations
Specifications
| Brand | NavePoint |
|---|---|
| Color | Gray |
Questions about this item
What data rate does the Cat5e UTP patch cable support in practice?
The cable is rated for 100 MHz bandwidth and delivers up to 1 Gbps transfer speed on 10/100/1000 Base-T networks.
What physical space and connector clearance does the 50-foot cable require?
It uses standard RJ45 plugs with snagless strain-relief boots on both ends and a 24 AWG stranded copper core inside a PVC jacket.
How do you install the patch cable, and what step do people often miss?
Push each RJ45 connector firmly into the port until the tab clicks; the snagless boot can make the click feel softer, so verify the lock is fully seated.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



