We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White solid-core Ethernet cable on spool, 500FT, 24AWG, 4 twisted pairs

NavePoint

NavePoint CAT5e UTP CCA Solid 24AWG 500FT White network ethernet cable

SKU CH-AM47-B409M

Solid 24 AWG copper-clad aluminium cable supplies 500 ft of Category 5e UTP for structured wiring runs

  • TypeEthernet Crossover Raw
  • ColorWhite
  • Solid 24 AWG conductors ensure reliable signal transmission
  • CCA construction reduces material cost for large installations
  • 500 ft bulk reel supports whole-building wiring projects
  • Unshielded twisted-pair design fits standard residential and office runs
  • Category 5e rating handles common Gigabit Ethernet needs

Solid 24 AWG conductor for fixed wiring

This bulk Ethernet cable uses solid 24 AWG copper-clad aluminium conductors in four unshielded twisted pairs. It is intended for permanent installation in walls, ceilings or conduit where the cable will not be moved after termination. Installers pulling long runs for home or office networks will find the 500-foot reel convenient for multiple drops.

CCA construction affects heat and voltage drop

Copper-clad aluminium has higher resistance than solid copper, so the cable generates more heat per unit of current and exhibits greater voltage drop over distance. The unshielded design offers no protection against external electromagnetic interference, which can increase packet errors in electrically noisy environments. Users should verify that the resulting signal margins meet the requirements of their active equipment before closing walls.

Raw bulk cable requires termination and testing

The reel supplies raw cable only; no connectors, boots, strain-relief sleeves or labelling markers are included. Installers must provide RJ45 plugs, a crimp tool and a cable certifier or qualifier to confirm each link meets Category 5e performance after termination. The manufacturer highlights that testing for the specific application is the installer’s responsibility before completing the installation.

Highlights

  • Solid 24 AWG conductors ensure reliable signal transmission
  • CCA construction reduces material cost for large installations
  • 500 ft bulk reel supports whole-building wiring projects
  • Unshielded twisted-pair design fits standard residential and office runs
  • Category 5e rating handles common Gigabit Ethernet needs

Specifications

BrandNavePoint
TypeEthernet Crossover Raw
ColorWhite

Questions about this item

How is this solid 24 AWG CCA cable installed, and what termination step causes problems?

Strip each pair carefully to avoid nicking the aluminium core, then seat the wires fully into an RJ45 plug or keystone jack rated for solid conductors before crimping or punching down.

What maintenance or replacement will this cable need later?

CCA conductors fatigue faster than pure copper; expect to re-terminate any connection that is moved or flexed repeatedly, and plan to replace the run if intermittent faults appear.

What limit shows up first under sustained use?

The aluminium core has higher resistance than copper, so voltage drop on PoE loads and increased attenuation on long runs become the limiting factors before the jacket or insulation degrades.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.