NavePoint
NavePoint CAT5e UTP Bulk CCA Ethernet Network Cable Solid 24AWG 500FT Black
Bulk Cat5e UTP cable with four solid 24 AWG copper-clad aluminium pairs on a 500 ft reel for structured wiring
- TypeEthernet Crossover Raw
- ColorBlack
- Category 5e UTP cable handles standard Ethernet networking
- Copper-clad aluminium conductors reduce material cost for long runs
- Solid 24 AWG conductors suit fixed in-wall installations
- 500 ft bulk reel lets you cut custom lengths
- Unshielded twisted-pair design fits typical home and office environments
Solid UTP CCA cable for fixed runs
This NavePoint CAT5e bulk cable uses four solid 24 AWG conductors with copper-clad aluminium cores. It comes in a 500 FT black reel for pulling through walls, conduit or ceiling spaces. The unshielded twisted-pair construction keeps the cable light and easy to terminate with standard RJ45 plugs.
Suited for permanent installs, not patch leads
Installers wiring homes, offices or rack cabinets will appreciate the solid-core design that punches down cleanly on patch panels and keystone jacks. Builders who need flexible patch cords for moveable equipment should choose stranded cable instead, and anyone requiring shielded runs for noisy environments must look at a different construction.
24 AWG solid copper-clad aluminium conductors
The conductor material and gauge set the distance and power-handling limits for PoE and data signals. Verify that your termination hardware and tester accept solid CCA wire before committing to a full installation.
Highlights
- Category 5e UTP cable handles standard Ethernet networking
- Copper-clad aluminium conductors reduce material cost for long runs
- Solid 24 AWG conductors suit fixed in-wall installations
- 500 ft bulk reel lets you cut custom lengths
- Unshielded twisted-pair design fits typical home and office environments
Specifications
| Brand | NavePoint |
|---|---|
| Type | Ethernet Crossover Raw |
| Color | Black |
Questions about this item
What conduit size does the 24 AWG solid cable need?
The cable uses 24 AWG solid conductors; choose conduit rated for that gauge and the 500 ft run length.
How is the solid CCA cable terminated, and what step is often missed?
Strip each 24 AWG solid wire, untwist the 4 pairs, seat them in the RJ45 plug in the correct order, then crimp; the step often missed is testing every link before the cable is concealed.
When should the CCA bulk cable be replaced?
Replace the cable if certification testing shows attenuation or crosstalk outside Cat5e limits, or if the jacket is damaged during the 500 ft installation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
