NavePoint Cat5e Plenum CMP 1000ft Blue 350MHz 24AWG UTP network ethernet cable

Plenum-rated Cat5e for in-wall runs

This NavePoint cable carries a CMP plenum rating, so it meets fire-safety codes for installation in air-handling spaces, between floors and inside walls. The 1000 ft pull box supplies enough length for whole-building structured wiring projects. Solid bare copper conductors keep signal loss low over the full run. It is built for installers and IT teams who need code-compliant horizontal cabling.

350 MHz tested bandwidth under continuous load

The cable is specified to 350 MHz and verified to exceed TIA 568.2 Category 5e performance requirements across the full frequency range. Four unshielded twisted pairs maintain consistent insertion loss and crosstalk margins during sustained gigabit traffic, PoE delivery or multi-stream video. Solid 24 AWG conductors resist the resistance rise that stranded patch cords exhibit on long channels. The margin above the base standard supports reliable throughput on every linked device.

Low-smoke jacket limits flame spread

The plenum-grade jacket restricts flame propagation and smoke generation when exposed to fire, satisfying building-code requirements for open-air return plenums. At 4.80 mm overall diameter the cable pulls through conduit and tight pathways without excessive friction. Unshielded construction keeps the bundle light and flexible for standard termination tools. No external grounding or drain wire is needed for typical gigabit and PoE deployments.