NavePoint
NavePoint CAT5e Plenum CMP 1000 Ft Green Solid Bare Copper 24AWG 4 Pair UTP network ethernet cable
Plenum-rated CAT5e UTP cable with solid bare copper conductors for 400 MHz bandwidth in 1000 ft pull box
- TypeEthernet Crossover Raw
- ColorGreen
- Plenum-rated jacket meets strict fire-safety codes for in-wall runs
- Solid 24 AWG bare copper conductors deliver reliable conductivity
- 100 MHz bandwidth supports Gigabit Ethernet speeds
- 1000 ft pull-box enables custom-length cuts without tangles
- Green colour simplifies cable identification in dense installations
Plenum-Rated Indoor Cable
The NavePoint CAT5e bulk Ethernet cable is a plenum-rated (CMP) unshielded twisted-pair cable designed for indoor installations where fire-safety codes require low-smoke, flame-retardant jackets. It suits network installers and IT professionals running horizontal runs in air-handling spaces such as drop ceilings and raised floors. The 1000 Ft length on a pull box supports custom-cut segments for structured-cabling projects. Buyers who need outdoor-rated or direct-burial jacketing should look elsewhere.
Fire Safety and Signal Performance
The plenum jacket meets stringent fire-test standards for use in environmental air spaces, reducing smoke and flame spread compared with standard riser or PVC cables. Solid 24AWG bare copper conductors provide lower attenuation than copper-clad aluminum, supporting reliable data transmission up to 400 MHz bandwidth. The cable is rated for 100 MHz Category 5e performance, making it suitable for Gigabit Ethernet and PoE devices in typical office or home deployments. No active cooling or power draw applies to this passive copper medium.
Pull Box and Footage Marks
The tangle-free pull box dispenses cable smoothly during long pulls, reducing snags and kinks that can damage conductors. Sequential one-foot markings printed on the jacket let installers measure and cut exact lengths without a separate tape measure, speeding up termination and labelling. The green colour aids visual identification among multiple cable runs in dense patch panels or conduit. No connectors, tools or software are included in the package.
Highlights
- Plenum-rated jacket meets strict fire-safety codes for in-wall runs
- Solid 24 AWG bare copper conductors deliver reliable conductivity
- 100 MHz bandwidth supports Gigabit Ethernet speeds
- 1000 ft pull-box enables custom-length cuts without tangles
- Green colour simplifies cable identification in dense installations
Specifications
| Brand | NavePoint |
|---|---|
| Type | Ethernet Crossover Raw |
| Color | Green |
Questions about this item
How do I pull the 1000 Ft cable from the tangle-free Pull Box and what step do installers often miss?
Pull the cable straight from the box centre to avoid kinks, then verify each 1-foot mark before cutting so the 24AWG solid copper pairs stay within Category 5 length limits.
What maintenance or replacement will this Green CAT5e Plenum cable need over time?
Inspect the plenum jacket annually for abrasion or heat discoloration; replace any section where the solid bare copper conductors show oxidation or the 4-pair twist is damaged.
At what point does the 100 MHz Category 5 rating become the limiting factor during sustained Gigabit traffic?
The 100 MHz bandwidth ceiling caps throughput before the 400 MHz headroom is reached, so sustained loads above 100 MHz signalling will hit the Category 5 limit first.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



