We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coil of black solid-core Cat5e riser cable in pull box

NavePoint

NavePoint CAT5e CMR Riser UTP 24AWG 350MHz 1000FT Black network ethernet cable

SKU CH-1Y61-C39N5

CMR-rated Category 5e UTP cable with 24 AWG solid conductors, 350 MHz bandwidth and 1000 ft pull box for in-wall runs

  • TypeEthernet Crossover Raw
  • ColorBlack
  • CMR riser rating allows in-wall installation between floors
  • 24 AWG solid copper conductors support longer cable runs
  • 350 MHz bandwidth exceeds Category 5e TIA requirements
  • 1000 ft pull box simplifies custom network installations
  • ETL listed and UL 444 compliant for fire safety

Bulk cable for custom network runs

This 1,000 foot pull-box of Cat5e riser-rated UTP cable is built for installers wiring commercial walls and floor-to-floor links. Solid 24 AWG bare-copper conductors keep signal quality high over long distances. The black jacket is ETL listed and meets UL 444 and TIA-568-C.2 fire-safety codes for in-wall use.

Thermals noise and power in normal use

Passive copper wiring generates no heat, emits no noise and draws no power during operation. Performance stays within the 350 MHz bandwidth specification as long as the cable remains undamaged and properly terminated. No active cooling or external supply is required for the cable itself.

Pull-box and compliance change the install workflow

The integrated pull-box feeds cable smoothly without tangles, speeding up long pulls through conduit or ceiling spaces. CMR rating and ETL listing let inspectors approve the run for vertical shafts and plenums without extra paperwork. UL 444 and TIA-568-C.2 markings on the jacket confirm code compliance at a glance.

Highlights

  • CMR riser rating allows in-wall installation between floors
  • 24 AWG solid copper conductors support longer cable runs
  • 350 MHz bandwidth exceeds Category 5e TIA requirements
  • 1000 ft pull box simplifies custom network installations
  • ETL listed and UL 444 compliant for fire safety

Specifications

BrandNavePoint
TypeEthernet Crossover Raw
ColorBlack

Questions about this item

How do I pull the 1000 ft bulk cable through walls and terminate the 24 AWG solid conductors?

Pull from the box centre to avoid kinks, keep bends gentle for the solid core, strip each of the four twisted pairs to the TIA-568-C wiring scheme, and punch down onto keystone jacks or a patch panel rated for solid wire.

Will the CMR riser jacket degrade or need replacement inside walls over time?

The CMR jacket meets UL 444 fire safety standards for in-wall and between-floor runs; it does not require scheduled replacement unless physical damage or moisture exposure occurs.

At what distance does the 350 MHz Cat5e rating limit Gigabit Ethernet performance?

The cable supports 1000BASE-T up to the standard 100 metre channel length; the 350 MHz bandwidth provides margin above the 100 MHz Cat5e minimum, so the 100 metre limit remains the governing factor.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.