We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black bulk Ethernet cable reel 1000FT solid 24AWG UTP CCA

NavePoint

NavePoint CAT5e 1000FT UTP CCA Solid 24AWG Black network ethernet cable

SKU CH-TY3G-RD1ME

A 1000 ft bulk CAT5e cable with 4 solid UTP pairs of 24 AWG copper-clad aluminium for in-wall network runs

  • TypeEthernet Crossover Raw
  • ColorBlack
  • Solid 24 AWG conductors ensure reliable signal transmission over long runs
  • 1000 ft bulk reel lets you cut exact lengths for any installation
  • Unshielded twisted-pair design reduces crosstalk for stable network performance
  • Copper-clad aluminium construction keeps material cost low for large projects
  • Category 5e rating supports gigabit speeds for computers, VoIP phones and consoles

Home and office wiring

NavePoint CAT5e 1000FT UTP CCA Solid 24AWG Black network ethernet cable is a bulk roll intended for installers and IT teams running permanent links through walls, ceilings and conduit. The 1000 foot length supports long pulls without splices. Copper-clad aluminium conductors keep material cost low while meeting Category 5e performance targets for voice, data and PoE devices.

Thermals noise and power

The cable is passive and carries no active electronics, so it produces no heat, draws no power and makes no sound during operation. Signal integrity depends on proper termination and avoiding tight bends or crushing during the pull. Testing each run before closing walls confirms the link meets the required category performance.

Build fit and constraints

Solid 24 AWG conductors are made for punch-down blocks, keystone jacks and patch panels, not for repeated flexing or direct equipment cords. The unshielded design suits environments without strong EMI sources. Installers must verify the 45 metre channel limit for their application and ensure connectors rated for solid wire are used. CCA conductors are not suitable for applications requiring pure copper per specific standards.

Highlights

  • Solid 24 AWG conductors ensure reliable signal transmission over long runs
  • 1000 ft bulk reel lets you cut exact lengths for any installation
  • Unshielded twisted-pair design reduces crosstalk for stable network performance
  • Copper-clad aluminium construction keeps material cost low for large projects
  • Category 5e rating supports gigabit speeds for computers, VoIP phones and consoles

Specifications

BrandNavePoint
TypeEthernet Crossover Raw
ColorBlack

Questions about this item

How do I install the 24 AWG solid CCA conductors into RJ45 plugs without breaking the aluminium core?

Strip the jacket gently, untwist each pair only as far as needed, seat the solid wires fully into the plug channels, and crimp with a ratchet tool calibrated for solid conductors; the aluminium core fractures if bent sharply or re-crimped.

What maintenance or replacement will the CCA cable need after it is pulled through walls?

Plan to re-terminate any outlet that is moved or re-patched because the solid aluminium-clad conductors work-harden and snap after repeated bending; the horizontal run itself requires no periodic service if left undisturbed.

At what length does the 1000 ft reel show attenuation problems on a 100 Mbps link?

Attenuation on CCA rises faster than on solid copper, so keep any single channel well under the 100 m channel budget; test each run with a qualified certifier before closing walls.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.