We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 42U server rack cabinet glass front door perforated rear doors cable management top 800mm deep

NavePoint

NavePoint 42U Server Rack Cabinet Glass Door Cable Management Top 800mm Deep Commercial Series

SKU CH-CJNB-QDVJG

A 42U rack cabinet with glass front door, perforated split rear doors, lockable side panels and integrated cable management rails for 19-inch equipment

  • TypeFull Height
  • Rack Units42U
  • ColorBlack
  • Supports 3000 lb static load for dense equipment
  • 42U height fits full 19-inch rack stacks
  • Adjustable rails in 10 mm steps from 6 to 21.5 in
  • Lockable glass front and perforated split rear doors
  • Four quick-release side panels for fast access

42U Server Rack Cabinet

The NavePoint Commercial Series cabinet provides 42U of rack space in a 600mm wide, 893mm deep enclosure. It supports any EIA-310 compliant 19-inch rack-mountable devices such as servers, patch panels, PDUs and routers. A 3000 pound static weight capacity handles high-density networking equipment. Glass front and perforated split rear doors balance visibility with airflow.

Adjustable Mounting Rails

Square cage nut rails adjust in 10 mm increments between 6 and 21.5 inches deep, replacing fixed-depth rails that limit hardware compatibility. U-markings simplify alignment during installation. The jump is worth it when deploying mixed-depth servers or when future hardware changes require rail repositioning without replacing the cabinet.

EIA-310E Compliance Limits

The cabinet adheres to the EIA/ECA-310E standard for 19-inch equipment mounting. It cannot accommodate devices that exceed the 19-inch width specification or require non-standard hole patterns. Weight distribution must stay within the 3000 pound static rating. IP20 protection grade limits use to indoor environments without exposure to water jets or dust ingress.

Highlights

  • Supports 3000 lb static load for dense equipment
  • 42U height fits full 19-inch rack stacks
  • Adjustable rails in 10 mm steps from 6 to 21.5 in
  • Lockable glass front and perforated split rear doors
  • Four quick-release side panels for fast access

Specifications

BrandNavePoint
TypeFull Height
Rack Units42U
ColorBlack

Questions about this item

What floor space and clearance does the 600 mm wide by 893 mm deep cabinet require?

The cabinet footprint is 600 mm wide and 893 mm deep; allow additional front and rear clearance for the reversible glass front door and split perforated rear doors to open fully.

How are the 19-inch square cage nut rails adjusted, and what step is often missed?

Rails slide in 10 mm increments between 6 and 21.5 inches deep; the u-markings must be aligned on both front and rear rails before tightening the cage nuts.

Which parts of the cable management system may need attention after extended use?

The included full-height cable management rails and quick-release side panel latches should be inspected periodically for secure fit and latch operation.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.