We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 42U server rack cabinet, glass front door, perforated rear doors, 1000mm deep

NavePoint

NavePoint 42U Server Rack Cabinet 1000mm Deep Commercial Series

SKU CH-WNDF-N31V0

Holds 42U of 19-inch equipment with 3000 pound static capacity and 1093mm depth

  • TypeRack Mount Cabinet
  • Rack Units42U
  • ColorBlack
  • Supports dense deployments with 42U capacity
  • Holds heavy equipment up to 3000 pound static load
  • Fits standard 19-inch gear via EIA/ECA-310E rails
  • Improves airflow with perforated split rear doors
  • Simplifies cabling using included full-height management rails

42U Server Cabinet for High-Density Networking

The NavePoint 42U Server Rack Cabinet 1000mm Deep Commercial Series provides a 600mm wide, 1093mm deep enclosure with a 3000 pound static weight capacity. It is built for data centres and server rooms that need to house dense networking equipment. The black cabinet holds standard 19-inch rack-mount devices from vendors such as Dell, HP and IBM.

Replaces Smaller Racks When Density Grows

This cabinet replaces smaller enclosures when equipment count exceeds available rack units or when deeper servers require more rail adjustment. The jump is worth it when you need the full 42U height and a mounting rail depth adjustable in 10 mm increments between 6 and 29.5 inches. Adjustable square cage nut rails with u-markings simplify alignment during upgrades.

Limits of the EIA-310 Standard and IP20 Rating

The cabinet complies with EIA/ECA-310E for 19-inch equipment mounting and carries an IP20 protection grade. It does not meet higher ingress protection ratings, so it is unsuitable for environments with dust or water exposure. The glass front door offers visibility but the perforated rear doors define the airflow path. Buyers needing side-to-side cooling or sealed enclosures should look elsewhere.

Highlights

  • Supports dense deployments with 42U capacity
  • Holds heavy equipment up to 3000 pound static load
  • Fits standard 19-inch gear via EIA/ECA-310E rails
  • Improves airflow with perforated split rear doors
  • Simplifies cabling using included full-height management rails

Specifications

BrandNavePoint
TypeRack Mount Cabinet
Rack Units42U
ColorBlack

Questions about this item

How wide is the cabinet and what floor space does the 1093 mm depth require?

The unit is 600 mm wide and 1093 mm deep, so plan for at least that footprint plus clearance for the reversible front glass door and split rear perforated doors to swing open.

The square cage nut rails adjust in 10 mm steps from 6 to 29.5 inches — what is the common alignment mistake?

Installers often leave the front and rear rails at different depths; use the printed u-markings on both pairs to match the exact 10 mm increment before tightening the cage nuts.

The side panels are quick-release and lockable — how are they secured after maintenance?

Slide each panel back into the frame until the quick-release latches engage, then turn the integrated locks to lock all four panels.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.