We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1U vented sliding shelf on rails, powder-coated steel, adjustable depth 16.98 to 19.7 inches

NavePoint

NavePoint 1U Vented Sliding 4-Post Adjustable 16.98"-19.7" Deep Server Rack Shelf

SKU CH-48P3-H9H1S

A 1U vented sliding shelf holds up to 99 lbs of non-rackmount gear and adjusts from 16.98 to 19.7 inches deep in any EIA-310 19-inch rack

  • TypeRack Mount Cabinet
  • Rack Units1U
  • ColorBlack
  • Holds 99 lbs of non-rack gear on cold-rolled steel
  • Slides out fully for quick front access to equipment
  • Vented surface keeps airflow moving through the rack
  • Fits any EIA-310 19-inch cabinet with 1U height
  • Adjustable 16.98-19.7 inch depth matches most four-post frames

1U Vented Sliding Shelf

The NavePoint 1U vented sliding shelf occupies a single rack unit and fits any EIA 310E compliant 19-inch four-post rack. It is built from cold-rolled steel with a black powder-coated finish and supports up to 99 lbs of non-rackmount equipment. The shelf surface measures 16.4 by 13.7 inches and provides slotted vents for airflow around routers, modems or small servers.

Assembled installation with included hardware

The shelf arrives fully assembled and includes eight M6 cage nuts, screws and washers for mounting. Adjustable brackets allow a depth range of 16.98 to 19.7 inches between the front and rear rails. The sliding mechanism extends the tray forward for convenient access to connected devices without removing them from the rack.

Suited for shallow to mid-depth four-post racks

This unit suits installers who need a ready-to-mount sliding surface for lightweight networking gear in a standard 19-inch frame. It does not suit two-post racks, cabinets requiring deeper than 19.7-inch rail spacing, or loads exceeding the 99 lb rating. Buyers needing tool-less mounting or a solid non-vented surface should look elsewhere.

Highlights

  • Holds 99 lbs of non-rack gear on cold-rolled steel
  • Slides out fully for quick front access to equipment
  • Vented surface keeps airflow moving through the rack
  • Fits any EIA-310 19-inch cabinet with 1U height
  • Adjustable 16.98-19.7 inch depth matches most four-post frames

Specifications

BrandNavePoint
TypeRack Mount Cabinet
Rack Units1U
ColorBlack

Questions about this item

How do I verify the shelf is working correctly after installing it in my 19-inch rack?

Slide the shelf fully in and out to confirm smooth movement, check that the vented surface sits level at 1U height, and place equipment up to 99 lbs to ensure stable support without bending.

What does the package include and is any extra hardware required for a standard 4-post rack?

The shelf arrives assembled with 8 M6 cage nuts, 8 M6 screws and 8 M6 washers for EIA-310 compliant racks; no additional mounting hardware is needed for typical 4-post installations.

Which depth setting should I choose for a rack with 450 mm internal clearance?

Adjust the sliding rails anywhere between 16.98 and 19.7 inches to match your rack's depth; the 450 mm specification aligns with the maximum 19.7 inch extension for full compatibility.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.