We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1U four-post shelf rails, adjustable depth to 33.5 inches, satin finish, 14 gauge steel

NavePoint

NavePoint 1U 4-Post Shelf Rail 33.5" Deep

SKU CH-F2E5-GWVJ5

Adjustable 1U rail kit supports tower or rackmount servers up to 110 lbs in standard 19", 23" or 30" four-post cabinets

  • TypeRack Mount Cabinet
  • Rack Units1U
  • ColorBlack
  • Supports servers without direct mounting using adjustable rail kits
  • Fits 19", 23" and 30" four-post racks with depth adjustable to 33.25
  • Holds up to 110 lbs on 14 gauge cold rolled steel rails
  • Occupies only 1U of rack space in a satin black finish
  • Includes both 10-32 and 12-24 screw kits for flexible installation

1U 4-Post Shelf Rail

This NavePoint shelf rail occupies 1U of rack space and supports servers or tower units without direct mounting. It fits standard 19, 23 and 30 inch four-post racks with both depth and width adjustment. The 14 gauge cold rolled steel construction provides a 110 lbs weight capacity with a satin black finish.

33.5 inch depth capacity

Depth adjusts to 33.25 inches to accommodate deeper equipment while the 110 lbs limit defines the maximum supported load. Heavier chassis or fully populated storage arrays will exceed this capacity and require a reinforced shelf. The rail kit distributes weight across four posts rather than relying on front-panel screws alone.

Included 10-32 and 12-24 screw kits

Both thread patterns ship in the box so installers can match whatever cage nuts or tapped holes the rack uses. No separate hardware purchase is needed and no adapter brackets are required. The dual-kit approach eliminates the trial-and-error of sourcing the correct screws after the rack is already bolted down.

Highlights

  • Supports servers without direct mounting using adjustable rail kits
  • Fits 19", 23" and 30" four-post racks with depth adjustable to 33.25
  • Holds up to 110 lbs on 14 gauge cold rolled steel rails
  • Occupies only 1U of rack space in a satin black finish
  • Includes both 10-32 and 12-24 screw kits for flexible installation

Specifications

BrandNavePoint
TypeRack Mount Cabinet
Rack Units1U
ColorBlack

Questions about this item

Will these rails fit a standard 19-inch four-post rack that is already installed?

Yes, they mount on 19-inch, 23-inch and 30-inch four-post racks with adjustable depth up to 33.25 inches and width adjustment built in.

How can I confirm the rails are holding the server safely after installation?

The cold-rolled 14-gauge steel rails are rated for 110 lbs; verify the server sits level, the locking tabs engage, and no sag appears across the 1U shelf.

Do the rails ship with both 10-32 and 12-24 mounting screws so I do not need to buy hardware separately?

Both 10-32 and 12-24 screw kits are included in the box, covering the two common thread patterns for four-post racks.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.