We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black open-frame 18U server rack on four casters, powder-coated steel, square mounting holes visible

NavePoint

NavePoint 18U 4-Post Adjustable Server Rack with Casters, Black

SKU CH-7JD6-4VVX9

An 18U four-post server rack with 19-inch mounting, adjustable depth to 15.77 inches, 14-gauge steel construction rated for 661.38 pounds, and four casters included

  • TypeRack Mount Cabinet
  • Rack Units18U
  • ColorBlack
  • Quick installation with numbered mounting positions
  • 20 cage nuts, screws and washers included for immediate setup
  • 14-gauge cold-rolled steel supports 661.38 lb stationary load
  • Adjustable depth up to 15.77 in fits full-size servers
  • Four casters, two with brakes, enable mobile deployment

18U Four-Post Server Rack

This 18U open-frame rack provides 19-inch mounting for network and server equipment in telecom rooms, data rooms or similar facilities. Numbered mounting positions and included cage nuts, screws and washers simplify the build process. It is suited for technicians who need a sturdy, cost-effective frame for rack-mountable gear.

Adjustable Depth Upgrade

The frame offers a maximum adjustable mounting depth of 15.77 inches, replacing fixed-depth racks that cannot accommodate deeper hardware. The jump is worth it when you must support full-size servers or a mix of short and long devices in the same cabinet. Builders who need a second fixed-depth rack for a separate row gain nothing from this flexibility.

Mobile Heavy-Duty Frame

Constructed from 14 gauge cold-rolled steel with a powder-coated black finish, the rack supports a stationary load of 661.38 pounds. Four casters, two with brakes, let you preconfigure the rack and roll it into position while still allowing rear cable access. The overall footprint is 23.6 by 23.6 by 40.0 inches, so installers must ensure the destination space accommodates those dimensions.

Highlights

  • Quick installation with numbered mounting positions
  • 20 cage nuts, screws and washers included for immediate setup
  • 14-gauge cold-rolled steel supports 661.38 lb stationary load
  • Adjustable depth up to 15.77 in fits full-size servers
  • Four casters, two with brakes, enable mobile deployment

Specifications

BrandNavePoint
TypeRack Mount Cabinet
Rack Units18U
ColorBlack

Questions about this item

What floor space does the 23.6 in by 23.6 in footprint need?

The rack stands 23.6 inches wide and 23.6 inches deep, so allow at least that square area plus clearance for the casters to swivel and for rear cable access.

Which hardware pieces go on first when assembling the numbered 18U rails?

Bolt the four vertical posts to the top and bottom frames using the self-squaring design, then roll the unit onto its four included casters before tightening the cage nuts into the numbered holes.

When should the 20 M6 cage nuts and screws be checked or replaced?

Inspect the cage nuts and screws whenever equipment is added or removed; replace any that show stripped threads or deformation to keep the 661.38 lb load rating secure.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.