We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NavePoint

NavePoint 1000ft RG59 Siamese 20AWG 18/2 CCTV Bulk Wire network ethernet cable Black

SKU CH-W58X-6TE2Z

Combined RG59 video and 18/2 DC power cable on a 1000ft spool with 20AWG CCA braid for CCTV runs

  • TypeDual Power & Video Cable
  • ColorBlack
  • 1000 ft single reel simplifies long CCTV runs
  • Siamese design carries video and power together
  • RG59 20 AWG coax shields video signal
  • 18 AWG two-strand pair feeds camera DC
  • Black PVC jacket protects cable during installation

1000 ft RG59 Siamese Cable

This 1000-foot RG59 Siamese cable combines a 20 AWG coaxial video line with an attached 18 AWG two-strand DC power pair. It is built for installers and DIY users who need a single-run solution for analogue CCTV cameras. The copper-clad aluminium braid is protected by a black PVC jacket for durability.

Suited for analogue camera runs; not for IP or PoE

The cable suits projects where each camera requires separate coaxial video and low-voltage power connections. It does not carry Ethernet data or Power over Ethernet, so installers deploying IP cameras or network-based recorders should select a different cable type. Buyers needing longer uninterrupted pulls beyond the supplied length will also need an alternative.

Braided CCA shield and bonded power pair simplify

The braided copper-clad aluminium shield helps reduce interference on the video signal during installation. Having the red and black power conductors bonded to the coaxial jacket eliminates the need to pull and secure two separate cables, reducing labour time and keeping cable routes tidy.

Highlights

  • 1000 ft single reel simplifies long CCTV runs
  • Siamese design carries video and power together
  • RG59 20 AWG coax shields video signal
  • 18 AWG two-strand pair feeds camera DC
  • Black PVC jacket protects cable during installation

Specifications

BrandNavePoint
TypeDual Power & Video Cable
ColorBlack

Questions about this item

What connectors and power supply do I need to terminate the video and power conductors on this 1000ft RG59 Siamese cable?

You will need BNC connectors for the RG59 coaxial video cores and a DC power supply that matches the voltage required by your cameras to connect to the attached 18/2 power wires.

Can I run this RG59 Siamese cable alongside existing analogue CCTV wiring without signal interference?

The braided CCA shielding on the RG59 video cores helps reject interference, so it can be routed near older analogue CCTV cables while maintaining clear video transmission.

How can I verify the cable is working correctly after installation?

Connect a camera and monitor to each end, apply power, and confirm a stable colour picture with no rolling or noise; then measure DC voltage at the camera terminals to ensure the 18/2 power pair is delivering the expected level.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.