We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black aluminium gas-spring monitor arm with C-clamp and grommet base, articulated joints, matte finish

NaSR

NaSR Single Monitor Arm Gas Spring 32" 19.8lbs Black

SKU CH-BY93-Z2ECJ

Gas-spring single monitor arm holds 17–32″ screens up to 19.8 lbs with full tilt, swivel, rotation and height adjustment on C-clamp or grommet bases

  • Supports 17 to 32 inch screens up to 19.8 lbs
  • Gas spring arm extends and retracts for ergonomic positioning
  • Monitor head tilts 90°, swivels 180° and rotates 360°
  • C-clamp fits desks .39 to 3.14 inches, grommet fits under 2.16 inches
  • Frees desk space by lifting the display off the surface

Single Monitor Arm for 17-32 Inch Screens

This gas spring arm fits LCD and LED monitors from 17 to 32 inches and supports loads up to 19.8 lbs. It uses the 75x75mm and 100x100mm VESA patterns found on most current displays. The aluminium construction handles flat and curved panels weighing 10 to 20 pounds.

C-Clamp and Grommet Mounting Included

Installation uses either the supplied C-clamp or grommet base. The clamp secures to desks between .39 and 3.14 inches thick, while the grommet option fits surfaces up to 2.16 inches thick. Both methods require access to the desk edge or a pre-drilled hole, so verify clearance before starting.

Check VESA Pattern and Desk Thickness First

Confirm your monitor has 75x75mm or 100x100mm mounting holes and falls within the 10 to 20 pound range. Measure your desk thickness against the .39 to 3.14 inch clamp range or the 2.16 inch grommet limit. Buyers needing support for heavier screens or non-standard VESA patterns should consider a different mount.

Highlights

  • Supports 17 to 32 inch screens up to 19.8 lbs
  • Gas spring arm extends and retracts for ergonomic positioning
  • Monitor head tilts 90°, swivels 180° and rotates 360°
  • C-clamp fits desks .39 to 3.14 inches, grommet fits under 2.16 inches
  • Frees desk space by lifting the display off the surface

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the gas spring arm holds my 19.8lb monitor at the chosen height without drifting?

After mounting, set the monitor to eye level and release it; the gas spring should keep the screen steady at that height. Verify the arm swivels smoothly through its full +180°/-180° range and the head tilts +90°/-90°, swivels 180° and rotates 360° without sag.

Which mounting hardware and accessories are included, and what must I supply?

The box contains the aluminum gas-spring arm, a C-clamp for desks 0.39-3.14 inches thick and a grommet base for desks up to 2.16 inches thick, plus VESA 75x75mm and 100x100mm mounting plates and screws. You only need to provide a compatible 17-32 inch monitor weighing 10-20 lbs and basic tools.

How do I decide between the C-clamp and grommet base for my desk?

Measure your desktop thickness. If it falls between 0.39 and 3.14 inches and you prefer not to drill, use the C-clamp. If the desk is 2.16 inches or thinner and you have or can cut a grommet hole, the grommet base gives a cleaner look. Both support the full 19.8lb capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.