NaSR
NaSR Adjustable Monitor Arm Silver 17-32" 19.8 lbs
A gas-spring arm holds 17 to 32 inch screens up to 19.8 lbs, swivels 180 degrees, tilts 90 degrees and rotates 360 degrees on 75x75mm or 100x100mm VESA mounts
- Fits 17 to 32 inch screens with 75x75 or 100x100 VESA
- Gas spring arm extends and retracts for ergonomic positioning
- Arm swivels 180 degrees and monitor rotates 360 degrees
- Raises monitor to eye level to reduce neck and eye strain
- Clamp and grommet base fits most desks to free up space
Single-arm monitor mount for 17 to 32 inch screens
This gas-spring arm holds one display weighing up to 19.8 lbs and fits VESA patterns of 75x75mm and 100x100mm. It targets office workers, streamers and home users who want to reclaim desk space and set an ergonomic viewing height without a fixed stand.
High-grade aluminium construction
The arm swivels 180 degrees at the base while the monitor head tilts 90 degrees up or down, swivels 180 degrees and rotates a full 360 degrees. Both mounting options ship in the box so the installer can choose edge clamping or a through-desk bolt depending on the surface.
Passive cooling and silent operation
No fans or motors are present so the mount adds zero noise and draws no power. The gas spring holds position without drift under normal loads and the aluminium frame dissipates any ambient heat naturally. Builders needing motorised height presets or multi-monitor arrays should look elsewhere.
Highlights
- Fits 17 to 32 inch screens with 75x75 or 100x100 VESA
- Gas spring arm extends and retracts for ergonomic positioning
- Arm swivels 180 degrees and monitor rotates 360 degrees
- Raises monitor to eye level to reduce neck and eye strain
- Clamp and grommet base fits most desks to free up space
Specifications
No published specifications for this item yet.
Questions about this item
What VESA patterns does this arm support?
It mounts to 75x75mm and 100x100mm hole patterns on monitors from 17 to 32 inches.
What desk thickness does the clamp and grommet base accept?
The included C-clamp and grommet base fit most standard desks; check your desk edge or hole diameter before mounting.
How do I set the gas-spring tension so the monitor stays level?
Use the tension adjustment bolt on the arm to match your monitor's weight up to 19.8 lbs until it holds position without drifting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



