We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small metal incremental encoder 38mm diameter with 2m cable and stainless steel shaft

myVolts

myVolts E6B2-CWZ6C Incremental Encoder 38mm 2m Cable

SKU CH-DYR4-AYG5F MPN E6B2-CWZ6C

38 mm incremental encoder with 2 m cable, DC 5–26 V supply, and selectable resolution up to 5000 P/R

  • TypeAT
  • 38 mm compact diameter fits tight machine spaces
  • ASIC internals give high reliability and strong noise immunity
  • Stainless steel spindle plus metal shell resist shock and wear
  • DC 5–26 V supply with reverse-wiring and short-circuit protection
  • 2 m cable and selectable resolutions from 100 to 5000 P/R

38 mm Incremental Encoder for Motion Control

The myVolts E6B2-CWZ6C is a 38 mm diameter incremental encoder built for precise position and speed feedback in automation systems. It operates on a DC 5 to 26 V supply with open-collector output and provides A, B and Z phase signals through a 2 m cable. The stainless-steel spindle and metal shell give solid impact resistance for industrial environments.

Upgrade from Basic Optical or Magnetic Sensors

This encoder replaces simpler sensors when you need selectable resolution up to 5000 pulses per revolution and built-in protection against load short circuits and reverse wiring. The jump is worth it when an application demands higher pulse counts, stronger anti-interference performance or a rugged stainless spindle that withstands 30 N radial and 20 N axial loads.

Straightforward Shaft Mounting

The compact 38 mm body fits tight spaces and the 6 mm thrust shaft mounts directly to a motor or leadscrew. Wiring follows the standard colour code: brown for DC 5 to 26 V, blue for 0 V and black for signal outputs. The main installation issue is exceeding the 30 N radial or 20 N axial load limits, which can damage the spindle bearings.

Highlights

  • 38 mm compact diameter fits tight machine spaces
  • ASIC internals give high reliability and strong noise immunity
  • Stainless steel spindle plus metal shell resist shock and wear
  • DC 5–26 V supply with reverse-wiring and short-circuit protection
  • 2 m cable and selectable resolutions from 100 to 5000 P/R

Specifications

TypeAT

Questions about this item

What shaft size and cable length does the 38 mm encoder need for mounting?

The encoder has a 6 mm thrust shaft diameter and ships with a standard 2 m cable for wiring.

How do I wire the DC5–26 V supply correctly and avoid the common polarity mistake?

Connect the brown wire to positive and the blue wire to 0 V; the built-in reverse-wiring protection guards against accidental swap.

Which wearing part will need replacement first under 30 N radial load?

The stainless-steel spindle bearings carry the 30 N radial and 20 N thrust ratings and are the primary wear item.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.