myVolts
myVolts 30V 5A Digital Programmable Power Supply
Adjustable 0-30V/5A DC output with 10mV/1mA resolution, CV/CC modes, OVP/OCP protection, five presets, keypad lock and temperature-controlled fan
- TypeAT
- Precise 0-30 V output with 10 mV resolution
- Accurate 0-5 A current control at 1 mA steps
- Programmable OVP and OCP protect connected loads
- Five memory presets recall settings instantly
- Keypad lock prevents accidental parameter changes
Professional DC power supply for lab and bench use
This programmable unit delivers continuously adjustable 0-30V output at up to 5A with 10mV and 1mA resolution. Setup accuracy is better than 0.05% plus 20mV for voltage and 0.1% plus 3mA for current. It operates from 220V mains at 50-60Hz and is rated for ambient temperatures from 32 to 104°F.
Five user presets and keypad lock streamline
Built-in parameter storage lets engineers recall five programmed voltage and current combinations instantly. Configurable over-voltage and over-current protection thresholds guard connected loads, while the keypad lock prevents accidental changes during long runs. An output on/off switch adds another layer of control.
Intelligent fan and compact bench form factor suit
Temperature-controlled cooling keeps acoustic noise low across the 32-104°F operating range. The unit accepts standard 220V input and provides a single DC output channel with CV/CC mode indicators. Storage tolerances extend to 158°F and 70%RH for shelf life between projects.
Highlights
- Precise 0-30 V output with 10 mV resolution
- Accurate 0-5 A current control at 1 mA steps
- Programmable OVP and OCP protect connected loads
- Five memory presets recall settings instantly
- Keypad lock prevents accidental parameter changes
Specifications
| Type | AT |
|---|
Questions about this item
Will the cooling fan need cleaning or replacement after long use?
The unit uses an intelligent temperature-controlled fan that speeds up only when needed, reducing wear and noise during extended operation.
What limits continuous output at the full 30 V and 5 A?
The supply is rated for continuous operation up to 40 °C ambient; above that temperature the protection circuits will reduce output to stay within safe limits.
How much heat and noise should I expect when it runs all day at high load?
Ripple stays below 1 mV RMS and the fan runs quietly at low speeds until internal temperature rises, keeping both heat and acoustic output low.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite N262 014 BL Cat6a Shielded 10G Patch Cable 14ft Blue accessories barebone
Intel HNS2600KPF barebone pc 1U dual Xeon DDR4 512 GB
- Xeon
- Socket R3 (LGA2011-…



