MTYTOT 12 V 4 A 48 W Power Adapter 5.5 mm × 2.5 mm
Supplies 12 V at up to 4 A with five protection circuits and a 5.5 mm × 2.5 mm barrel plug
- Type12 V
- ColorBlack
- Specifications48 watts, 12 volts_of_direct_current, 4 amps, 100 volts, DC
- Connector ADC Barrel
- Connector BDC Barrel
- Cable Jakcet TypePlastic
- Delivers up to 48 W for demanding 12 V devices
- Universal 100-240 V input works worldwide without a converter
- Five built-in protections guard against overload, over-voltage, over-temperature and short circuits
- 5 mm × 2.5 mm barrel plug fits common LED strips, cameras and peripherals
- 6 ft cable and 150 g weight keep the setup tidy and portable
Purpose and fit
This MTYTOT adapter supplies 12 volts at up to 4 amps for devices that draw 48 watts or less. It suits LED strip lights, CCTV cameras, printers, keyboards, TV boxes and speakers that use a 5.5 mm by 2.5 mm centre-positive barrel plug.
Build integration
The unit accepts 100 to 240 volts at 50 or 60 hertz, so it works on mains supplies worldwide without a separate voltage selector. A 4.6 foot cable reaches from a wall socket to desktop or rack gear, and the black plastic housing measures 4.3 by 16.4 by 19.6 centimetres for easy routing.
Upgrade context
It replaces any 12 volt brick rated below 48 watts when the original unit has failed or lacks overload, over-voltage, over-temperature and short-circuit cut-offs. Buyers whose equipment needs more than 4 amps or a different barrel size should look elsewhere.
Highlights
- Delivers up to 48 W for demanding 12 V devices
- Universal 100-240 V input works worldwide without a converter
- Five built-in protections guard against overload, over-voltage, over-temperature and short circuits
- 5 mm × 2.5 mm barrel plug fits common LED strips, cameras and peripherals
- 6 ft cable and 150 g weight keep the setup tidy and portable
Specifications
| Brand | MTYTOT |
|---|---|
| Type | 12 V |
| Color | Black |
| Specifications | 48 watts, 12 volts_of_direct_current, 4 amps, 100 volts, DC Barrel, 50/60Hz, type_a_2pin_na, 0, LED light strips, CCTV cameras, printers, keyboards, TV boxes, speakers |
| Connector A | DC Barrel |
| Connector B | DC Barrel |
| Cable Jakcet Type | Plastic |
| Connector Style | DC Barrel |
| Apple Compatible | DC Barrel |
| Features | LED light strips, CCTV cameras, printers, keyboards, TV boxes, speakers, DC Barrel, Corded Electric, 0, DC, 48 watts |
| Dimensions | 4.3 cm x 16.4 cm x 19.6 cm |
| Weight | 150 grams |
| Package Quantity | 1 |
| Package Contents | 1 |
| Disclaimer | not_applicable |
Questions about this item
Will the 48 W limit trip if my LED strip runs continuously at full brightness?
The adapter delivers up to 48 watts at 12 volts and 4 amps. If your strip draws less than that continuously, the overload protection will not activate.
Does the brick get hot or make noise when powering a CCTV camera 24/7?
It has no fan; heat is dissipated through the plastic case. Normal warmth is expected, but the over-temperature cut-off will shut it down if internal limits are exceeded.
My device uses a 5.5 mm × 2.1 mm barrel jack — will the included tip fit?
The supplied connector is 5.5 mm outer diameter with a 2.5 mm inner pin. A 2.1 mm jack is smaller and will not make reliable contact.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



