We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Slim white LED bar with magnetic ends, 30.5 cm long

MOTOU X Light Bar Magnetic LED Under Cabinet 2.9972 cm x 5.207 cm x 30.5054 cm

SKU CH-9FS2-49FV1

Magnetic LED light bar snaps onto Bambu Lab printers for flicker-free daylight illumination of the print chamber

  • Product nameMOTOU
  • lamp typeLight Emitting Diode
  • listingMOTOU, X Light Bar, Daylight
  • energy efficientLight Emitting Diode
  • size dimensions2.9972 cm x 5.207 cm x 30.5054 cm
  • styleModern
  • Designed for Bambu Lab X1 and P1 series printers
  • Tool-free magnetic snap-on installs in seconds without damage
  • Flicker-free daylight LEDs reduce eye strain during long prints
  • Bright even illumination reveals layer lines and stringing in real time
  • X1 models use 1.25 connector while P1 models use GH1.25 connector

Snap-On Magnetic LED for Bambu Lab Printers

The MOTOU X Light Bar is a daylight LED strip built to snap onto Bambu Lab X1C, X1E, P1P and P1S printers. Strong neodymium magnets hold the bar in place without glue, screws or modifications. Installation and removal take about three seconds and leave the printer finish untouched.

Connector Type Decides Compatibility

X1 series printers require the 1.25 connector while P1 series printers use the GH1.25 connector. The bar ships with the correct plug for the chosen series so no adapters are needed. Selecting the wrong variant will prevent the light from powering on.

30.5 cm Bar Lights the Full Chamber

At 30.5054 cm long the strip covers the build volume of the supported printers, revealing layer lines and stringing during multi-colour prints. The single bar adds focused daylight illumination; users needing light on multiple printers must purchase additional units.

Highlights

  • Designed for Bambu Lab X1 and P1 series printers
  • Tool-free magnetic snap-on installs in seconds without damage
  • Flicker-free daylight LEDs reduce eye strain during long prints
  • Bright even illumination reveals layer lines and stringing in real time
  • X1 models use 1.25 connector while P1 models use GH1.25 connector

Specifications

BrandMOTOU
ModelX Light Bar
Product nameMOTOU
lamp typeLight Emitting Diode
listingMOTOU, X Light Bar, Daylight
energy efficientLight Emitting Diode
Part NumberMagnetic LED Light Bar
size dimensions2.9972 cm x 5.207 cm x 30.5054 cm
styleModern
bulb includedLight Emitting Diode
Title 22not_applicable
Title 20not_applicable
descriptionflicker-free, MOTOU, Daylight
featuresLight Emitting Diode

Questions about this item

How bright does the X Light Bar make the print chamber on my Bambu Lab printer?

The natural daylight LEDs provide even, flicker-free illumination across the whole chamber so you can see layer lines and stringing in real time.

Which connector does the light use for my specific Bambu Lab model?

X1C and X1E use a 1.25 connector; P1P and P1S use a GH1.25 connector — the bar ships with the correct one for your printer.

Will the magnetic mount fit the frame of my Bambu Lab printer without drilling?

Strong neodymium magnets snap onto the metal frame in seconds, needing no glue, screws or modifications.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.