We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short 12-inch braided 3.5 mm splitter cable with one male and two female plugs

MORELECS MLS4P1M-2FM 3.5mm Headset Splitter 12 Inch

SKU CH-VK3S-0Y592

Splits a single 3.5 mm headset jack into separate microphone and headphone plugs for PC or PS4 gaming

  • SpecificationsMORELECS
  • Connector AAuxiliary
  • Connector PlatingNylon
  • Dimensions5.9 in x 7.8 in x 0.4 in
  • Weight0.009 kilograms
  • Package Quantity1
  • Connect headset mic and audio to separate PC ports via single 3.5 mm plug
  • CTIA-standard gaming headsets plug straight into laptop or tablet combo jacks
  • 12 inch nylon-braided cable keeps desk tidy and reaches front-panel ports
  • Lightweight .009 kg build adds no strain to headphone or microphone cables
  • 30 month warranty covers the adapter for long-term use

4-Pole Headset Splitter for PC and PS4

This MORELECS MLS4P1M-2FM adapter connects a single 4-pole 3.5mm headset to separate microphone and headphone ports on a computer or console. It is designed for gamers and remote workers using CTIA-standard headsets with combined audio and mic plugs. The 12-inch nylon-braided cable bridges the distance between front-panel jacks without clutter.

Plug-and-play with CTIA headsets only

Installation requires no drivers; simply insert the 3.5mm male plug into the headset and the two female plugs into the corresponding PC or laptop ports. The splitter follows the CTIA wiring standard, so it works with most Android-compatible headsets but will not function with Apple Earbuds or OMTP-wired models. Mis-matched standards are the only common cause of silent microphones or missing audio.

Passive wiring maintains signal over long sessions

Because the adapter uses straight-through copper conductors with no active electronics, audio quality and microphone bias voltage remain stable during extended gaming or conference calls. The nylon braid resists kinking and the .009 kg weight avoids stress on panel jacks. No power draw means zero heat buildup and no driver crashes after hours of continuous use.

Highlights

  • Connect headset mic and audio to separate PC ports via single 3.5 mm plug
  • CTIA-standard gaming headsets plug straight into laptop or tablet combo jacks
  • 12 inch nylon-braided cable keeps desk tidy and reaches front-panel ports
  • Lightweight .009 kg build adds no strain to headphone or microphone cables
  • 30 month warranty covers the adapter for long-term use

Specifications

BrandMORELECS
ModelMLS4P1M-2FM
SpecificationsMORELECS
Connector AAuxiliary
Connector PlatingNylon
Dimensions5.9 in x 7.8 in x 0.4 in
Weight0.009 kilograms
Package Quantity1

Questions about this item

How can I verify the 3.5mm headset splitter is working correctly after plugging it in?

Connect a CTIA-standard headset to the two female ports, then check that both audio playback and microphone input are detected in your PC or PS4 sound settings.

What comes in the box and do I need any extra cables?

The package includes one 12-inch nylon-braided splitter with a 4-pole male plug and two 3-pole female sockets; no additional cables are required.

Which version should I choose for a CTIA Android headset versus Apple Earbuds?

This model supports CTIA-standard Android headsets only and is not compatible with Apple Earbuds, so select it only if your headset follows the Android pinout.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.