We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel front wheel bearing hub with 8 lug bolts and ABS sensor connector

Moog

Moog 4WD Front Wheel Bearing Hub 2006-2008 Dodge Ram 1500 2500 3500 8 Lugs accessories - wheel

SKU CH-FY32-K9EZX

Front wheel bearing hub with ABS sensor fits 2006-2008 Dodge Ram 1500 2500 3500 4WD models

  • ColorBlack
  • Precision tapered bearing handles heavy 4WD loads
  • Integrated ABS sensor with 55-tooth ring restores braking safety
  • 24-inch wiring harness reaches factory connectors without splicing
  • Eight 9/16-18 lug bolts secure 8-lug wheels directly
  • Direct fit for 2006-2008 Ram 1500 2500 3500 4WD front

Direct-fit wheel hub for 2006-2008 Dodge Ram 1500

This Moog hub assembly fits 2006 to 2008 Dodge Ram 1500 2500 and 3500 models with four-wheel drive. It mounts on either the driver or passenger front position using four bolts to the knuckle. The unit includes an ABS sensor with a square connector and a 47.24 inch wiring harness. It is built for driven axles with a 33-spline interface.

Sealed tapered bearing runs in grease without

The hub uses a sealed tapered roller bearing that operates in factory grease. No additional lubrication or cooling is required during normal driving. The steel housing and flange resist deformation under load. The integrated ABS ring has 55 teeth and works with the included sensor to provide wheel-speed data to the vehicle system.

ABS sensor and wiring harness are pre-installed

The square-connector ABS sensor and 47.24 inch harness are already fitted to the hub. Eight lug bolts with 9/16-18 threads are supplied for wheel mounting. No separate sensor purchase or wiring work is needed. The hub centrebore is 6.5 inches and the pilot diameter is 4.48 inches for correct wheel location.

Highlights

  • Precision tapered bearing handles heavy 4WD loads
  • Integrated ABS sensor with 55-tooth ring restores braking safety
  • 24-inch wiring harness reaches factory connectors without splicing
  • Eight 9/16-18 lug bolts secure 8-lug wheels directly
  • Direct fit for 2006-2008 Ram 1500 2500 3500 4WD front

Specifications

ColorBlack

Questions about this item

How do I install this front wheel bearing hub on my 2006 Dodge Ram 1500 and which step is often missed?

Bolt the hub to the knuckle using the four mounting bolts, torque them to spec, then connect the ABS sensor square plug and route the 47.24 inch wiring harness so it cannot rub — the harness routing is the step most often overlooked.

What maintenance or replacement will this Moog hub need later?

The tapered roller bearings are sealed for life; no grease service is possible. If play or noise develops, the entire hub assembly must be replaced because the bearing, ABS ring and flange are one non-serviceable unit.

What limit appears first under sustained heavy use on this 8-lug driven hub?

Heat buildup in the tapered roller bearings is the first limit; the 5.2 inch hub height and 8.07 inch diameter restrict cooling, so prolonged high-load driving can accelerate bearing fatigue before the 33-spline axle or 55-tooth ABS ring wears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.