We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three white 120mm ARGB PWM fans in a pack with a 6x6 fan hub

Montech

Montech GF120W3IN1 120mm ARGB PWM case fan 3-pack white

SKU CH-XRKE-17Y1D MPN GF120W3IN1

Three white 120 mm ARGB fans with hydraulic bearings, PWM control from 800 to 1600 RPM, 66.3 CFM airflow and 25.5 dBA noise, plus a 6-port hub

  • TypeCase Fan
  • Fan Size120mm
  • ColorWhite
  • LEDARGB
  • Quiet cooling at 25.5 dBA noise level
  • Strong airflow reaches 66.3 CFM for effective heat removal
  • PWM control adjusts speed from 800 to 1600 RPM
  • ARGB lighting adds customisable colour effects
  • Three fans with hub simplify installation in white builds

Three-pack ARGB PWM fans

The Montech GF120W3IN1 kit supplies three 120 mm white case fans with addressable RGB lighting and 4-pin PWM control. A bundled 6x6 fan hub lets builders synchronise lighting and speed across all three units from a single motherboard header. The white frame and blades suit light-themed builds that want coordinated colour without mixing separate SKUs.

Airflow capacity and speed limits

Each fan spins between 800 and 1600 RPM and moves up to 66.3 CFM at full speed. That range covers typical chassis intake or exhaust duties and handles moderate heat loads from mid-range components. Demanding multi-GPU setups or heavily overclocked CPUs will exceed what three 120 mm fans can dissipate, so builders targeting extreme thermal headroom should plan for larger or additional cooling.

Acoustics and power profile

At the rated maximum the fans produce 25.5 dBA, a level that stays unobtrusive in a quiet room. PWM control allows the curve to drop well below that figure during light workloads, reducing both noise and power draw. The hydraulic bearing keeps friction low, helping the fans maintain consistent speed without rattling over time.

Highlights

  • Quiet cooling at 25.5 dBA noise level
  • Strong airflow reaches 66.3 CFM for effective heat removal
  • PWM control adjusts speed from 800 to 1600 RPM
  • ARGB lighting adds customisable colour effects
  • Three fans with hub simplify installation in white builds

Specifications

TypeCase Fan
Fan Size120mm
ColorWhite
LEDARGB
Shipping weight0.61 kg
Package size165 × 127 × 89 mm

Questions about this item

Will the 800-1600 RPM range work with my older motherboard's 4-pin headers?

Yes, the 4-pin PWM connector is standard and lets the board control speed between 800 and 1600 RPM.

How can I verify the ARGB lighting and 25.5 dBA noise level are working correctly?

Connect the included 6x6 fan hub to a 5 V ARGB header and power; lighting should sync with motherboard software and noise should stay near 25.5 dBA at low speed.

Does the 3-in-1 pack include the 6x6 fan hub and all cables needed for three 120 mm fans?

The pack contains three white 120 mm ARGB PWM fans and a 6x6 fan hub; no extra cables are required for basic operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.