We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black 120mm case fans with rifle bearings and PWM ARGB connectors

Montech

Montech AX120 PRO 120mm Rifle Bearing 3-Pack Black

SKU CH-NX0W-7PWRR

Three 120 mm rifle-bearing fans deliver up to 72.3 CFM at 1600 RPM while staying as quiet as 25.4 dBA

  • Fan Size120mm
  • Bearing TypeRifle Bearing
  • RPM600~1600RPM (+/-10%)
  • Air Flow72.3CFM
  • Noise Level25.4dBA
  • Power ConnectorPWM 4Pin & ARGB 5V3Pin
  • High airflow of 72.3 CFM keeps components cool
  • Quiet 25.4 dBA operation at full speed
  • Rifle bearing rated for long service life
  • PWM control from 600 to 1600 RPM
  • 5 V ARGB lighting syncs with motherboard software

Three-pack 120 mm rifle-bearing fans

This pack delivers three 120 mm case fans with rifle-bearing motors rated for 600 to 1600 RPM. Each unit moves up to 72.3 CFM while producing 25.4 dBA at full speed. PWM four-pin and 5 V three-pin ARGB connectors provide both speed control and addressable lighting in a single cable set. The black 120×120×25 mm frames suit standard mounting points.

Builders who want coordinated airflow and lighting

The triple pack simplifies front, top or rear layouts where matching speed curves and RGB sync matter. Systems that need only one or two fans, or that lack a 5 V ARGB header, will leave connectors unused. Installations requiring sleeve-bearing silence or fluid-dynamic longevity should evaluate other bearing types.

Airflow headroom for mid-range heat loads

At 1600 RPM the fans supply 72.3 CFM, enough for typical CPU coolers and GPU exhaust in mainstream gaming rigs. Heavy overclocks or dual-radiator liquid loops that demand higher static pressure will exceed the practical limit of this blade profile. Lower RPM operation keeps noise near 25.4 dBA while still moving useful air for everyday workloads.

Highlights

  • High airflow of 72.3 CFM keeps components cool
  • Quiet 25.4 dBA operation at full speed
  • Rifle bearing rated for long service life
  • PWM control from 600 to 1600 RPM
  • 5 V ARGB lighting syncs with motherboard software

Specifications

Fan Size120mm
Bearing TypeRifle Bearing
RPM600~1600RPM (+/-10%)
Air Flow72.3CFM
Noise Level25.4dBA
Power ConnectorPWM 4Pin & ARGB 5V3Pin
ColorBlack
Dimensions120*120*25mm

Questions about this item

Does my motherboard need both a 4-pin PWM header and a 5V 3-pin ARGB header to run all features of the Montech AX120 PRO fans?

Yes, each fan uses a 4-pin PWM connector for speed control and a 5V 3-pin ARGB connector for lighting, so both headers are required for full functionality.

Will the 600-1600 RPM range of these 120mm fans work with an older case that only supports lower-speed 3-pin fans?

The fans use 4-pin PWM control; a 3-pin header will run them at fixed voltage, likely near maximum speed, so variable speed control is not available on legacy headers.

How can I confirm the AX120 PRO fans are spinning at the correct 600-1600 RPM and staying near 25.4 dBA after installation?

Monitor RPM in BIOS or fan-control software to verify the 600-1600 RPM range, and listen for the rated 25.4 dBA noise level under load to confirm expected operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.