We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red nylon-braided GPU 8-pin extension cable with black connectors, 30 cm long

Monoprice JYPH211 GPU 8-Pin (6+2) Extension Cable 30 cm Red

SKU CH-6N6Q-S62PY

Extends an 8-pin GPU power connection by 30 cm with 18 AWG tinned copper rated to 800 W

  • TypeCable Connectors
  • ColorBlack
  • Length3 ft.
  • Terminal GenderFemale to Female
  • Specifications8Pin (6+2), 8pin (6+2), 25, centimeters, Red, JYPH211
  • Features8Pin (6+2)
  • Stable power up to 800 W with 18 AWG tinned copper
  • 41 strands of 0.16 mm wire reduce resistance and oxidation
  • 94V-0 connectors rated to 105 °C for safe high-load use
  • Braided nylon sleeve adds flexibility and a clean red look
  • 30 cm male-to-female extension fits any standard ATX PSU

Power extension for graphics cards

This Monoprice JYPH211 cable extends an existing 8-pin (6+2) GPU power connector by 30 centimetres. It is designed for builders who need extra reach when routing power from the supply to the graphics card in a custom or test-bench build.

Fits standard ATX power supplies

The female-to-female connectors plug between the PSU cable and the graphics card without replacing the original wiring. The 18 AWG tinned copper conductors and 4.2 mm interface maintain stable delivery up to 800 watts while the braided nylon sleeve keeps routing tidy.

Handles up to 800 watts

The 41 strands of 0.16 mm tinned copper and NYLON66 94V-0 housings rated to 105 °C support continuous loads in the 500 to 800 watt range. It is not a primary power cable and cannot supply a card that requires more connectors than the PSU already provides.

Highlights

  • Stable power up to 800 W with 18 AWG tinned copper
  • 41 strands of 0.16 mm wire reduce resistance and oxidation
  • 94V-0 connectors rated to 105 °C for safe high-load use
  • Braided nylon sleeve adds flexibility and a clean red look
  • 30 cm male-to-female extension fits any standard ATX PSU

Specifications

BrandMonoprice
ModelJYPH211
TypeCable Connectors
ColorBlack
Length3 ft.
Terminal GenderFemale to Female
Specifications8Pin (6+2), 8pin (6+2), 25, centimeters, Red, JYPH211
Features8Pin (6+2)

Questions about this item

What power limit does the 18AWG tinned copper cable hit before voltage drop becomes an issue?

The extension is rated for stable delivery up to 800W, so sustained loads above that level are where resistance in the 41-strand 0.16mm conductors becomes the limiting factor.

How hot do the NYLON66 94V-0 connectors get when the GPU draws full load all day?

The connector housings are rated to 105°C, so even under continuous 500-800W throughput they remain within their certified thermal envelope without additional cooling.

Which existing power supply connector must I already have for this male-to-female extension to work?

You need a standard ATX 8-pin (6+2) PCIe output on your PSU; the extension simply plugs between that port and your graphics card's 8-pin (6+2) input.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.