Monoprice Inc.
Monoprice Inc. 8102 Cat6 network ethernet cable 1000ft 23AWG UTP CMR 550MHz black
Solid 23 AWG Cat6 UTP cable on a 1000 ft pull-box, CMR riser-rated with pure bare copper for 550 MHz bandwidth
- TypeNetwork Ethernet Cables
- Length304.8
- FeaturesBuy with Confidence: With Monoprice's Lifetime Warranty on a
- Pure bare copper meets UL 444 and TIA-568-C.2 safety standards
- Tested 550 MHz bandwidth supports 1 Gigabit speeds at 23 AWG
- CMR riser rating with solid copper conductors for in-wall runs
- Spine separator and rip cord ensure clean signal and easy stripping
- 1000 foot pull-box with length marks every foot for custom cuts
1000ft Cat6 Bulk Cable for Installers
This 1000ft roll of Cat6 unshielded twisted-pair cable is built for custom network installations where exact-length runs are required. It uses 23AWG solid bare copper conductors that meet UL 444 and TIA-568-D.2 fire and safety standards. The CMR riser rating allows vertical runs between floors in non-plenum spaces. A centre spine helps maintain pair geometry for consistent signal quality.
550MHz bandwidth and 1 Gigabit headroom
The cable is tested to 550MHz, providing ample margin for 1 Gigabit Ethernet over the full 100 metre channel length. At 23AWG the solid conductors keep insertion loss low, so performance holds up on long pulls. The unshielded design means it will not reject external noise as well as shielded alternatives in electrically noisy environments. Installers needing 10 Gigabit over copper should verify the longer reach limits for this category.
Replaces pre-made patch cables and CCA bulk wire
Cutting to length from this pull box eliminates the slack and connector strain that come with fixed-length patch cords. The pure bare copper construction avoids the higher resistance and brittleness of copper-clad aluminium wire that fails code inspection. The rip cord and foot markings speed up stripping and measuring on site. Buyers who need plenum-rated cable for air-handling spaces or outdoor-rated jackets for direct burial cannot use this CMR jacket.
Highlights
- Pure bare copper meets UL 444 and TIA-568-C.2 safety standards
- Tested 550 MHz bandwidth supports 1 Gigabit speeds at 23 AWG
- CMR riser rating with solid copper conductors for in-wall runs
- Spine separator and rip cord ensure clean signal and easy stripping
- 1000 foot pull-box with length marks every foot for custom cuts
Specifications
| Brand | Monoprice |
|---|---|
| Model | 108102 |
| Type | Network Ethernet Cables |
| Length | 304.8 |
| Features | Buy with Confidence: With Monoprice's Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers. |
| Shipping weight | 14.58 kg |
| Package size | 445 × 439 × 246 mm |
Questions about this item
Will the 23AWG solid bare copper conductors work with my existing Cat5e patch panels and RJ45 connectors?
The cable uses 23AWG solid bare copper conductors that meet Cat6 specifications and are designed for standard RJ45 termination.
How can I verify the 550MHz bandwidth performance after I terminate my custom cable runs?
Use a cable certifier or qualified tester to confirm the link passes Cat6 channel tests up to 550MHz across each terminated run.
Does the 1000ft pull box include RJ45 plugs, boots or a crimp tool, or must I buy them separately?
The box contains only the 1000ft UTP cable with rip cord and footage markings; RJ45 plugs, relief boots and crimping tools are sold separately.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



