We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White DisplayPort to DVI cable, 15 ft, 28 AWG, gold connectors

Monoprice Inc.

Monoprice Inc. 6017 displayport cable 15 ft 28 AWG white

SKU CH-1XMX-25KTB MPN 6017

Connects a DisplayPort source to a DVI display over 15 ft using 28 AWG pure copper conductors

  • TypeVideo Cables
  • ColorWhite
  • Length15.00 ft.
  • Cable Length15 ft.
  • Connector Number2
  • Wire Gauge28 AWG
  • Connect DVI displays directly to DisplayPort sources without an adapter
  • 15 ft length gives flexible placement across a desk or wall
  • 28 AWG pure copper cores with gold-plated connectors ensure reliable signal transmission
  • White jacket blends cleanly with light-coloured setups
  • Passive design works when the source outputs a DVI signal through DisplayPort

15 ft DisplayPort to DVI cable

This 15 ft DisplayPort to DVI cable connects a DVI-equipped monitor or HDTV to a DisplayPort source. It suits users who need a single-cable link without a separate adapter. The 28 AWG construction uses pure copper cores and gold-plated connectors for reliable signal transfer. Note that the source device must support DVI signal output through its DisplayPort jack.

28 AWG pure copper build with gold connectors

Flexible 28 AWG tin-plated conduits protect the pure copper cores during routing. Gold-plated connectors resist corrosion for a durable connection over time. The white jacket helps the cable blend into light-coloured setups. As a passive adapter cable, it is not recommended for Eyefinity multi-display configurations.

Passive design with no external power needed

The passive cable draws no extra power and adds no active electronics to the signal path. It operates silently with zero fan noise or thermal output. Normal use imposes negligible load on the source port. Ensure your DisplayPort source can output a DVI signal, as DisplayPort and DVI protocols are fundamentally different.

Highlights

  • Connect DVI displays directly to DisplayPort sources without an adapter
  • 15 ft length gives flexible placement across a desk or wall
  • 28 AWG pure copper cores with gold-plated connectors ensure reliable signal transmission
  • White jacket blends cleanly with light-coloured setups
  • Passive design works when the source outputs a DVI signal through DisplayPort

Specifications

BrandMonoprice
Model106017
TypeVideo Cables
ColorWhite
Length15.00 ft.
Cable Length15 ft.
Connector Number2
Wire Gauge28 AWG
Shipping weight0.32 kg
Package size503 × 417 × 122 mm

Questions about this item

Does the DisplayPort end send a native DVI signal, and what resolution does that cap at?

The cable only works when the DisplayPort source can output a DVI signal through its jack; it is a passive adapter so the maximum resolution depends on the source's single-link DVI output capability.

What clearance do the connectors need, and will the 28 AWG cable route through a tight grommet?

Each end has a standard DisplayPort plug and a DVI connector; the 28 AWG jacket is flexible, but you still need room for the DVI plug's thumbscrews and the DisplayPort latch.

How do I install it, and what step causes the "no signal" error?

Connect the DisplayPort end to the computer and the DVI end to the monitor, then verify the computer's DisplayPort is set to output a DVI-compatible signal — otherwise the link stays dark.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.