Monoprice Inc.
Monoprice Inc. 3031 coaxial rf cable 6 ft RG6 18AWG 75Ohm Quad Shield CL2 Black
Quad-shielded RG6 coaxial cable with F-type connectors, CL2 in-wall rating and 75 ohm impedance for reliable signal transmission
- Quad shielded construction reduces signal interference
- 18 AWG conductor supports reliable 75 Ohm transmission
- CL2 in-wall rating meets fire safety codes
- F-type connectors ensure secure device compatibility
- Lifetime warranty reflects manufacturer confidence
RG6 coaxial cable for in-wall runs
This Monoprice 3031 cable is a 6 ft RG6 coaxial lead with F-Type connectors on both ends. It uses an 18 AWG centre conductor and a 75 ohm impedance suited to standard RF distribution. The quad-shield construction combines 100 percent aluminium-mylar foil with a 60 percent aluminium braid. A CL2 rating and UL listing make it approved for in-wall installation.
Installers needing a short CL2-rated patch
The short length suits set-top boxes, wall plates or splitter connections where the run stays within six feet. Quad shielding helps reject interference in dense wiring bundles. Builders pulling longer horizontal or vertical drops should look at something else because this fixed length cannot span extended distances. Users requiring BNC, SMA or RCA termini also need a different cable.
6 ft fixed length decides fit
The single specification that determines whether this part works is the six-foot overall length. If the connection point is farther away the cable will not reach and no coupling is included. When the run is six feet or less the quad-shield RG6 construction delivers the specified 75 ohm performance with in-wall compliance.
Highlights
- Quad shielded construction reduces signal interference
- 18 AWG conductor supports reliable 75 Ohm transmission
- CL2 in-wall rating meets fire safety codes
- F-type connectors ensure secure device compatibility
- Lifetime warranty reflects manufacturer confidence
Specifications
| Brand | Monoprice |
|---|---|
| Shipping weight | 0.14 kg |
| Package size | 196 × 165 × 30 mm |
Questions about this item
What equipment must I already have to use the 6 ft RG6 18AWG 75Ohm Quad Shield CL2 coaxial cable?
You need devices with F-Type connectors such as a cable modem, satellite receiver, antenna or TV tuner that accept a standard coaxial RF input.
Will the quad-shielded RG6 cable work reliably with my older 75 ohm F-Type gear?
Yes, the 75 ohm impedance and F-Type connectors match legacy equipment so the cable carries the same signals without mismatch.
How can I verify the 3031 cable is performing correctly after I connect it?
Check for a clean picture and stable data on the connected device; a solid signal with no pixelation or drop-outs confirms proper operation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



