We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black Cat8 patch cable with snagless RJ45 plugs

Monoprice Inc.

Monoprice Inc. 145438 Cat8 network ethernet cable 0.5 ft black S/FTP 28AWG 2GHz 40G

SKU CH-XKJH-YGFSF

A half-foot Cat8 patch cable with S/FTP double shielding, 28 AWG pure copper conductors, snagless RJ45 boots, 2 GHz bandwidth and 40 Gbps throughput

  • TypeNetworking Patch Cables
  • FeaturesDouble Shielded (S/FTP)
  • Supports 40 Gbps data rates for high-speed networking
  • 2 GHz bandwidth handles demanding applications
  • S/FTP double shielding reduces electromagnetic interference
  • Snagless boot protects the RJ45 retaining clip
  • 100 % pure bare copper meets UL 444 and TIA 568C.2 standards

High-speed Cat8 cable for dense racks

This 0.5 ft Cat8 patch cord delivers up to 40 Gbps throughput and 2 GHz bandwidth over pure bare copper conductors. Double S/FTP shielding and snagless RJ45 boots protect signal integrity in crowded cabinets. It is built for IT managers and data-centre operators who need reliable short links between switches, servers and patch panels. The 28 AWG construction keeps the cable flexible for tight routing.

Suited for short high-density links, not long runs

The half-foot length fits rack-to-rack or blade-to-switch jumpers where excess slack would block airflow. Buyers needing desk-to-wall drops, floor-standing runs or any distance beyond a few feet should choose a longer cable. The 28 AWG gauge prioritises bend radius over tensile strength, so it is not intended for pulls through conduit or outdoor exposure.

40 Gbps at 2 GHz over 0.5 ft decides fit

The combination of 40 Gigabit data rate and 2 GHz bandwidth across a 0.5 ft S/FTP run is the single figure that tells you whether this patch cord matches your port speed and rack geometry. If your link requires that throughput at this exact reach, the cable meets the spec; otherwise a different length or category is required.

Highlights

  • Supports 40 Gbps data rates for high-speed networking
  • 2 GHz bandwidth handles demanding applications
  • S/FTP double shielding reduces electromagnetic interference
  • Snagless boot protects the RJ45 retaining clip
  • 100 % pure bare copper meets UL 444 and TIA 568C.2 standards

Specifications

BrandMonoprice
Model145438
TypeNetworking Patch Cables
FeaturesDouble Shielded (S/FTP)

Questions about this item

What clearance does the 0.5 ft Cat8 cable need behind a patch panel?

At 0.5 feet long with 28 AWG conductors, the cable needs only a few centimetres of depth behind the panel; the snagless boot adds minimal bulk and protects the RJ45 clip during insertion.

Which way round do the shielded RJ45 plugs go when terminating the S/FTP cable?

Both ends use identical RJ45 plugs wired to T568B; push each plug straight in until the snagless boot clicks, ensuring the outer foil and braid contact the metal shell for full S/FTP shielding.

How often should the double-shielded Cat8 cable be inspected or replaced in a 40 Gbps link?

Inspect the boot and connector for clip damage or shield degradation during any rack change; with pure bare copper conductors and 2 GHz rating, the cable itself rarely needs replacement unless physically kinked.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.