We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short blue Cat6A patch cable with snagless RJ45 connectors

Monoprice Inc.

Monoprice Inc. 144642 Cat6A Patch Cable 1 ft Blue UTP 24AWG 500MHz

SKU CH-N996-1RB62

A one-foot Cat6A patch cable with 24 AWG conductors tested to 500 MHz for 10 Gbps performance in high-density installations

  • TypeNetworking Patch Cables
  • Length1
  • FeaturesComponent Level: Compliant with TIA 568.2-D & ISO 11801, 100
  • Component-level TIA 568.2-D compliance ensures reliable 10 Gbps performance
  • CMR-rated bare copper jacket allows safe in-wall and riser installation
  • Ultra-short snagless boot reduces bend radius for tight high-density racks
  • DSX-8000 Fluke tested at 500 MHz verifies transmission quality
  • 24 AWG pure copper conductors support superior high-frequency signal integrity

Micro SlimRun Cat6A patch cable 1 ft

This Monoprice Cat6A patch cable measures one foot and uses 24 AWG pure bare copper conductors. It is built for high-density data centres, server rooms and cloud-computing racks where short, reliable links are required. The blue UTP jacket and snagless RJ45 plugs simplify identification and cable management in tight cabinets.

Sustained 10 Gbps throughput at 500 MHz

Component-level testing to TIA 568.2-D and ISO 11801 guarantees performance under continuous load rather than brief bursts. The DSX-8000 Fluke patch test at 500 MHz confirms stable 10 Gbps transmission across the full channel. CMR riser rating allows safe installation in walls, risers and between floors without degrading signal integrity over time.

Verify port spacing and bend-radius clearance

The ultra-short boot reduces the installed bend radius, but you must confirm that your switch or panel ports have enough front-to-back depth for the connector. Check that adjacent ports are spaced widely enough to accept the narrow boot without blocking neighbouring connections. Ensure your infrastructure supports Cat6A component-level specifications for the intended run length.

Highlights

  • Component-level TIA 568.2-D compliance ensures reliable 10 Gbps performance
  • CMR-rated bare copper jacket allows safe in-wall and riser installation
  • Ultra-short snagless boot reduces bend radius for tight high-density racks
  • DSX-8000 Fluke tested at 500 MHz verifies transmission quality
  • 24 AWG pure copper conductors support superior high-frequency signal integrity

Specifications

BrandMonoprice
Model144642
TypeNetworking Patch Cables
Length1
FeaturesComponent Level: Compliant with TIA 568.2-D & ISO 11801, 100% transmission tested to component level.

Questions about this item

Does the 24 AWG Cat6A cable generate noticeable heat when carrying 10 Gbps traffic all day?

The 24 AWG pure bare copper conductors are rated for 10 Gbps at 500 MHz and are tested to component level, so heat rise under continuous load stays within normal Cat6A limits.

What equipment must I already have to use the RJ45 connectors on this 1 ft patch cable?

Any device with a standard RJ45 Ethernet port — such as a switch, router, server NIC or patch panel — will accept the snagless connectors on this cable.

Will the ultra-short boot on this Cat6A cable fit alongside older Cat5e patch cords in a dense 1U panel?

The narrow, ultra-short boot reduces the bend radius and profile, allowing it to sit next to legacy Cat5e cords without blocking adjacent ports in high-density panels.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.