We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red SATA cable with straight locking connectors, 1.5 ft long

Monoprice Inc.

Monoprice Inc. 108784 1.5 ft SATA 6Gbps cable Red

SKU CH-PMN5-K94WD

A 1.5 ft red SATA cable with locking latches, certified for 6 Gbps data transfer

  • TypeOthers
  • ColorRed
  • Length1.50 ft.
  • Cable Length1.5 ft.
  • Connector Number2
  • Supports 6 Gbps transfers with SATA 3.0 certified quality
  • Locking latch on both straight connectors prevents accidental disconnects
  • 5 ft length keeps internal routing tidy and short
  • Red colour simplifies cable identification during builds
  • Backwards compatible with 3 Gbps and 1.5 Gbps SATA devices

SATA 6 Gbps internal cable

This 1.5 ft red cable carries the SATA Revision 3.0 specification for up to 6 Gbps transfer rates. It has a straight connector with a locking latch on each end. The cable is certified for maximum speeds when paired with equivalent devices and controllers.

Check connector orientation and device speed

Verify that both the drive and the controller have standard SATA ports for straight connectors. Confirm the slowest component in the chain, as the subsystem will run at the lowest supported rate. The cable is backwards compatible with 3 Gbps and 1.5 Gbps hardware.

Locking latch secures the link in a build

The attached latch on each connector prevents accidental disconnection from vibration or cable routing tension. The short 1.5 ft length reduces clutter inside the chassis. No extra power or adapters are required beyond the SATA data ports.

Highlights

  • Supports 6 Gbps transfers with SATA 3.0 certified quality
  • Locking latch on both straight connectors prevents accidental disconnects
  • 5 ft length keeps internal routing tidy and short
  • Red colour simplifies cable identification during builds
  • Backwards compatible with 3 Gbps and 1.5 Gbps SATA devices

Specifications

BrandMonoprice
Model108784
TypeOthers
ColorRed
Length1.50 ft.
Cable Length1.5 ft.
Connector Number2

Questions about this item

Does the 1.5 ft SATA 6Gbps cable include both straight locking connectors or do I need separate drive and motherboard plugs?

The cable has two straight connectors, each with an attached locking latch, so one cable connects the drive and the motherboard without extra parts.

Should I choose the red 1.5 ft length or a different colour or length for a tidy build?

This model is only offered in red at 1.5 ft; other colours or lengths would be a different Monoprice part number.

Will the 6 Gbps rating actually give me 6 Gbps throughput on my SATA 3.0 controller and SSD?

The cable is certified for SATA Revision 3.0 up to 6 Gbps, but the subsystem runs at the speed of the slowest device — controller, drive or cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.