We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 24-inch SATA cable with straight locking connectors at both ends

Monoprice Inc.

Monoprice Inc. 108779 SATA 6Gbps 24-Inch Cable with Locking Latch Black

SKU CH-R1R3-M6BRR

A 24-inch SATA 6 Gbps cable with locking latches on both connectors for secure internal connections

  • TypeOthers
  • ColorBlack
  • Length2.00 ft.
  • Cable Length2 ft.
  • Connector Number2
  • Certified 6 Gbps throughput with SATA 3.0 devices
  • Locking latch on each connector prevents accidental disconnects
  • 24-inch length suits compact or full-size builds
  • Backwards compatible with 3.0 and 1.5 Gbps hardware
  • Black straight connectors for clean internal routing

24-Inch SATA 6 Gbps Cable

This 24-inch internal cable connects SATA drives to motherboards or controllers at up to 6 Gbps. It suits builders assembling or upgrading desktops and servers that use the SATA Revision 3.0 interface. The black jacket and straight connectors fit standard drive bays and board headers without obstruction.

Straight Locking Latch Installation

Each end has a straight connector with an integrated locking latch that clicks into the port to resist vibration and accidental disconnection. Route the cable gently to avoid sharp bends near the latch; forcing the connector sideways can damage the plastic catch. The latch releases with a light squeeze, so removal does not require tools.

6 Gbps Certified Throughput

The cable is certified for SATA 6 Gbps operation and is backwards compatible with 3 Gbps and 1.5 Gbps devices. System speed will be limited by the slowest connected component, so a 6 Gbps cable on a 1.5 Gbps controller will run at 1.5 Gbps. Choose this part when the host controller and drive both support the 6 Gbps specification.

Highlights

  • Certified 6 Gbps throughput with SATA 3.0 devices
  • Locking latch on each connector prevents accidental disconnects
  • 24-inch length suits compact or full-size builds
  • Backwards compatible with 3.0 and 1.5 Gbps hardware
  • Black straight connectors for clean internal routing

Specifications

BrandMonoprice
Model108779
TypeOthers
ColorBlack
Length2.00 ft.
Cable Length2 ft.
Connector Number2

Questions about this item

How can I confirm the cable is delivering 6 Gbps after connecting it to my SATA 6 Gbps drive and controller?

The system will negotiate the highest speed supported by both ends; with a SATA 6 Gbps drive and controller the link runs at 6 Gbps, and the locking latches on each connector keep the connection secure.

What comes with the Monoprice 108779 and is anything else required to install it?

The box contains the 24-inch SATA 6 Gbps cable with straight locking-latch connectors on both ends; no extra parts are needed for a standard internal drive connection.

Should I choose the 24-inch length or a different size for my build?

The 24-inch length suits typical mid-tower layouts; pick a longer cable only if the drive bay is farther from the motherboard SATA port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.